Allen Bradley 1746-P1 !!! --- sales3@amikon.cn
Contact: Jessica
Email: sales3@amikon.cn
Skype: jessica01235483
Wechat: hu18030235311
Mobile: 86-18030235311(WhatsApp)
The Allen-Bradley 1746-P1 is an SLC 500 power supply. It has a line voltage of 85-132V or 170-265V AC at 47-63 Hz and with a typical line power requirement of 135 VA. Its internal current capacity is 2 A at 5V DC and 0.46 A at 24V DC and its inrush current is a maximum of 20 A. This power supply also has a 24V DC user-power current capacity of 200 mA and a 24V DC user-power voltage range of 18-30V DC.
The maximum user-supplied overcurrent protection is 15 A and the isolation between the input terminals and the backplane is 1800V AC RMS for 1 s. Measuring 5.5 x 2.3 x 5.7 inches and weighing 2 lbs or 0.9 kg, this power supply can be installed in a 1746 chassis. It also has an operating temperature of 0 to 60 ËšC and the current capacity is derated by 5% when the temperature exceeds 55 ËšC.
The input jumper must be set before applying power to the 1746-P1 power supply during installation. This is because the exposed pins have hazardous voltage when power is applied and this may result in injury. This power supply comes with fuse protection but this is limited only to guarding against fire hazards due to short-circuit conditions.
For user-power overcurrent conditions, the 1746-P1 Series A that is made in Japan will undergo a power supply shutdown and CPU fault and the recovery procedure is to reload the user program. For the 1746-P1 Series A that is made in Malaysia, the CPU continues but a 24V DC user shutdown occurs and the recovery procedure is to correct the overcurrent condition.
|
Part Number:
|
|
1746-P1
|
|
|
|
|
|
Backplane Current (5 Volts):
|
|
2 amps
|
|
|
|
|
|
Backplane Current (24 Volts):
|
|
0.46 amps
|
|
|
|
|
|
Frequency :
|
|
47-63 Hertz
|
|
|
|
|
|
Location:
|
|
1746 Chassis
|
|
|
|
|
|
Weight :
|
|
2 pounds (0.9 kilograms)
|
|
|
|
|
|
Dimensions:
|
|
5.5 x 2.3 x 5.7 inches
|
|
|
|
|
|
Operating Temperature:
|
|
0-60 Celsius
|
Allen Bradley 1746-P1
1746-P1 | Allen Bradley | Power Supply Module
Email:sales3@amikon.cn
Part Number:
|
1746-P1
|
|
Series:
|
SLC 500
|
|
Module Type:
|
Power Supply
|
|
Input Voltage:
|
120/220 Volts AC
|
|
Input Voltage Range:
|
85-132 or 170-265 Volts AC
|
HOT SALE --- please contact us !!!
|
1746-P2
|
SLC Rack Mounting Power Supply
|
|
1746-P3
|
SLC Rack Mounting Power Supply
|
|
1746-P4
|
SLC Rack Mounting Power Supply
|
|
1746-P5
|
SLC Rack Mounting Power Supply
|
|
1746-P6
|
SLC Rack Mounting Power Supply
|
|
1746-P7
|
SLC Rack Mounting Power Supply
|
|
1746-QS
|
SLC Output Module
|
|
1746-R10
|
SLC Replacement Covers and Labels
|
|
1746-R11
|
SLC Replacement Covers and Labels
|
|
1746-R13
|
SLC Replacement Covers and Labels
|
|
1746-R14
|
SLC Replacement Cover
|
|
1746-R15
|
SLC Replacement Retainer Clip
|
|
1746-R9
|
SLC Replacement Covers and Labels
|
|
1746-RL51
|
SLC Octal Label Kit
|
|
1746-RT25B
|
SLC Terminal Block
|
|
1746-RT25C
|
SLC Replacement Terminal Block
|
|
1746-RT25G
|
SLC Replacement Terminal Block
|
|
1746-RT25R
|
SLC Replacement Terminal Block
|
|
1746-RT26
|
SLC Replacement Terminal Block
|
|
1746-RT27
|
SLC Replacement Terminal Block
|
Email:sales3@amikon.cn
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Sales serves:
1.We supply a large number of prompt goods.
2.New packaging and factory sealed
