1000W single output switching power supply 24V
Description:
This K19H-UP1000S series switching power supplies is suitable for use in LED stage lighting, networking, test and measurement, IT applications, general electronics, low profile systems, automation, POS, motor based machinery and non patient contact medical equipment.
Features:
1, 1000W 24V single output power supply built-in high efficiency；
2, 24V 1000W single output power supply have short circuit, overload, overvoltage and over temperature protection；
3, 24V 42A single output power supply including filters, low output noise；
4,This 1000w smps power supply with full range AC input voltage.
|
Parameter
|
|
Item NO.
|
K19H-UP1000S24
|
|
CH1
|
|
Output
|
Output voltage
|
+24V
|
|
Rated current
|
42A
|
|
Current range
|
0-42A
|
|
Rated power
|
1008W
|
|
Ripple
|
300mVp-p
|
|
Output adjustable range
|
±5%
|
|
Output accuracy
|
±1%
|
|
Line regulation
|
±0.5%
|
|
Load regulation
|
±0.5%
|
|
Set-up,rise,hold up time
|
500ms, 30ms,5ms/115VAC 300ms, 30ms,10ms/230VAC
|
|
Input
|
Input voltage
|
88~264V AC
|
|
Input current
|
12A/115V 6A/230V
|
|
Frequency
|
47~63Hz
|
|
Efficiency
|
92% @230V,88% @115V
|
|
Inrush current
|
40A@230V
|
|
Leakage current
|
<3.5mA@240V
|
|
Power factor
|
>0.9@220V,>0.95@110V
|
|
Protections
|
Overload protection
|
105~150% protection, automatic recovery
|
|
Short circuit protection
|
Automatic recovery
|
|
Output overvoltage protection
|
30-33V
|
|
Over temperature protection
|
>105 ° C, the output is off, and the recovery is automatic.
|
|
Others
|
Auxiliary power
|
Provide 12V 0.2A auxiliary voltage output
|
|
Standby function
|
At the RC terminal, add a high level, turn off the CH1 and CH2 outputs.
|
|
Environments
|
Working temperature, humidity
|
-20~+60℃，10~90% RH，No condensation
|
|
Storage temperature, humidity
|
-40~85℃，10~95% RH
|
|
Temperature drift
|
±0.03%/℃(0~50℃)
|
|
vibration
|
10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES
|
|
Safety&EMC standards
|
Safety standard
|
GB4943
|
|
Withstand voltage
|
I/P-O/P： 3KV，I/P-FG：1.5KV；O/P-FG:0.5KV DC 1min.
|
|
Insulation resistance
|
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
|
|
EMC standard
|
EN55032 CLASS A,EN61000-3-2
|
|
Others
|
Dimension
|
180*82*48mm
|
|
weight
|
1.2Kg
|
|
Remark
|
1 .All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;
2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;
3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;
4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;
5. Load regulation: the measured output load from 0 to 100% load change measured.
|
Product picture:
FAQ
Q1. Can I have a sample order for power supply?
A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you accept OEM/ODM for the switching power supply?
A2: Yes. we do.
Q3:How about the quality?
A3:We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%
Q4:What is PFC?
A4:PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below:
Apparent Power=Input Voltage x Input Current (VA)
Real Power= Input Voltage x Input Current x Power Factor (W)
