3-stage Homogenizer Mixing Pump for Ice Cream
Product introduction
Bonve homogenizer mixing
pump for ice cream is an efficient type machine with mixing, dispersion,
breaking, dissolution, refinery, homogenization, emulsifying and pumping. The
machine can greatly simplify the traditional productions and upgrade the
production efficiency and product quality.
Except ice cream application, it is acknowledged to be used in petrochemical, refinery chemisry, consumer chemicals, biology pharmaceutics, foods processing, paper-paper, environmental protection, paint and so on.
Application for ice
cream
There are many stabilizers and emulsifiers in ice cream. Bonve ice cream homogenizer mixing pump can
successfully disperse and hydrate stabilizers and emulsifiers because it meets
the following process requirements:
-
The powderliquid mixing system is fast enough to incorporate
the powder and disperse it into the mixture.
-
-
Stabilizersemulsifiers tend to cling when added to the base
fluid, so the mixer must be able to break these down.
-
-
The stabilizeremulsifier must also be reduced to the smallest
particle size possible to maximize yield. Some products will not
"activate" unless the granularity is sufficiently reduced.
-
Working Principle
The main parts are stators and rotors. At centrifugal and fluid
forces created by high running of the rotors, the stators exercise on the
materials with strong power shearing, centrifugal pressing, breaking, fluid
friction, turbulent. The processed materials (solid, fluid and gas phase) are
quickly refined, homogenized, dis-aggregated and emulsified. The repeat of this
process can result in stable and high-quality products.
Product line: FHM1 and FHM3 series
Bonve homogenizer mixing
pumps for ice cream are mainly devided into 3 series based on different
numbers of rotor and stator, working types.
FHM1 series with
single stage rotor and stator
FHM1 series is equipped with one set multi-layer stator and
rotor. Required to be used in the cyclic processing of medium and small batch
production. For short distance transmission, homogeneous and emulsion.
FHM3 series with three stage rotors and stators
FHM3 series is an extension of the FHM1 and FHM2 series. The
working chamber is composed of three-stage rotor and stator. For applications
that require greater and quicker homogenizing and emulsifying, FHM3 is used. It
can be used in the cyclic proces sing of medium and large-scale production.
Main technical parameters:
|
Model(FHM1
series)
|
Electrical Power
(kW)
|
Rotation Speed
(rmin)
|
Capacity
(m3h)
|
Discharge
pressure
(Mpa)
|
Diameter of inletoutlet
|
|
FHM1100
|
|
2.2
|
|
2900
|
|
0-3
|
|
0-0.05
|
|
DN4040
|
|
|
FHM1120
|
|
4
|
|
2900
|
|
0-4
|
|
0-0.1
|
|
DN4040
|
|
|
FHM1140
|
|
5.5
|
|
2900
|
|
0-5
|
|
0-0.15
|
|
DN5040
|
|
|
FHM1165
|
|
7.5
|
|
2900
|
|
0-8
|
|
0-0.15
|
|
DN5040
|
|
|
FHM1185
|
|
15
|
|
2900
|
|
0-15
|
|
0-0.15
|
|
DN6550
|
|
|
FHM1200
|
|
22
|
|
2900
|
|
0-20
|
|
0-0.15
|
|
DN8065
|
|
FHM1220
|
|
30
|
|
2900
|
|
0-30
|
|
0-0.15
|
|
DN8065
|
|
|
FHM1240
|
|
37
|
|
2900
|
|
0-50
|
|
0-0.2
|
|
DN10080
|
|
|
Model(FHM2
series)
|
Electrical Power
(Kw)
|
Rotation Speed
(rmin)
|
Flow rate
(m3h)
|
Discharge
pressure
(Mpa)
|
Diameter of
inletoutlet
|
|
FHM21003
|
|
3
|
|
2900
|
|
0-3
|
|
0-0.05
|
|
DN4040
|
|
|
FHM2120
|
|
5.5
|
|
2900
|
|
0-4
|
|
0-0.1
|
|
DN4040
|
|
|
FHM2140
|
|
7.5
|
|
2900
|
|
0-5
|
|
0-0.1
|
|
DN5040
|
|
|
FHM2165
|
|
11
|
|
2900
|
|
0-10
|
|
0-0.15
|
|
DN5040
|
|
|
FHM2185
|
|
22
|
|
2900
|
|
0-15
|
|
0-0.15
|
|
DN6550
|
|
|
FHM2200
|
|
30
|
|
2900
|
|
0-20
|
|
0-0.15
|
|
DN8065
|
|
|
FHM2220
|
|
37
|
|
2900
|
|
0-30
|
|
0-0.15
|
|
DN8065
|
|
FHM2240
|
|
45
|
|
2900
|
|
0-50
|
|
0-0.2
|
|
DN10080
|
|
|
Model(FHM3
series)
|
Electrical Power
| | | | | | | | | | | | | |
