5501-380 | WOODWARD | Power Supply

WOODWARD   5501-380  !!!  --- sales3@amikon.cn  

  Contact:  Jessica

                                Skype:     jessica01235483

                                Wechat:   hu18030235311

                                Mobile:   86-18030235311(WhatsApp)

The extra bolt holes also enable continued use of the hub in case of stripped or worn holes. The splined hub is anodized for wear resistance, but is nevertheless aluminum and can be burred or otherwise damaged if not treated with reasonable care. Wipe off any obvious dirt from the shaft spline before you put the wheel on, and let the teeth get aligned and started with as little pressure as possible. The hub will slide onto the spline for a full half inch (13mm) before you need to actuate the pull ring; it doesn’t need to be forced on. 

WOODWARD   5501-380

5501-380 | WOODWARD | Power Supply

         sales3@amikon.cn  

A slide yoke allows a rack and pinion to be mounted on a straight axle. As the axle moves up and down, the distance from the chassis to the pinion changes, so the steering shaft must be capable of sliding in and out like a driveshaft. Note that the sliding travel required of a slide yoke depends on its mounting angle.

Emal:sales3@amikon.cn                                                                                         

If you have any question pls do not hesitate to contact us. 

We can supply all kind of the automaiton parts, if you want to purchase parts pls send the parts model to my mail,  I will prompt reply you as I receive the mail.