HiMAX5 Solar Panel
Sunpal HiMAX5 products use 182 mm large-size 0 light-decay silicon wafers, while deeply optimizing the module layout, which greatly reduces the ineffective power generation area of the module. Selected auxiliary materials, such as high-reflective grid film backplane, improve light utilization, and module conversion efficiency can reach 21.65%.
Half-cut cell technology
Si cell is divided into two, the main grid current is halved, and the current loss of the whole module is reduced to 1/4 of the original. The output power is about 5-10W higher than the same version of the whole cell module. The hot spot temperature of the half cell module The temperature is about 25℃ lower than that of the same version of the whole cell module, which can effectively reduce the hot spot effect of the module.
HiMAX5 solar panel meet certifications:
IEC 61215, IEC 61730, UL 61730
ISO 9001:2008: ISO Quality Management System
ISO 14001: 2004: ISO Environment Management System
OHSAS 18001: 2007 Occupational Health and Safety
HiMAX5 solar panel featureas:
-
Positive power tolerance (0~+5W) guaranteed High module conversion efficiency (up to 21.65%)
-
Slower power degradation enabled by Low LID Mono PERC technology: first year <2%, 0.55% year 2-25
-
Solid PID resistance ensured by solar cell process optimization and careful module BOM selection
-
Reduced resistive loss with lower operating current
-
Higher energy yield with lower operating temperature
-
Reduced hot spot risk with optimized electrical design and lower operating current
