Textile drapability tester-sfyh.com

Brush Pilling Tester GT-C20

ASTM D 3511 Brush Pilling Tester GT-C20 is used to determine the fabric pilling performance in simulate wearing and normal operating conditions

ISO 5981 Flex Abrasion Tester GT-C23

This ISO 5981 Flex Abrasion Tester is evaluated the resistance to combined shear flexing and rubbing of rubber or plastics-coated fabrics.

GSM Cutter for Fabric GT-C75

Circular Sample Cutter 100cm2 combine with the electronic balance. Suitable for 100 cm2*5mm depth of cut, provided with the cutting mat and the spare blades.

ICI Pilling Box Tester GT-C18

ICI Pilling Box Tester is to determine the surface pilling and snagging properties of both woven and knitted materials.

Down Feather Inspection Projector GT-C43C

This down feather detection projector mainly used for inspecting the down feather of Duck or Goose.

Low Temperature Schildknecht Flex Fatigue Tester GT-C47B

This machine applies to test the resistance to repeated flexing of the coated fabrics under low temperature. And provide a reference to improve the fabrics.

GT-C75-3 GSM Round Cutter 38mm

GSM CUTTER is an economical equipment to cutting the 38mm diameter sample of the fabric (Woven, Non Woven or Knitted). GSM ROUND CUTTER can be used to cut virtually any type of material including film, foam, carpet, paper and board.

Martindale GT-C13 For Testing The Abrasion and Pilling

The Martindale Abrasion and Pilling Tester is the standard method of determining the wear resistance of textiles or leather and the resistance to pilling.

Bursting Strength Tester AG10

Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.

Elmendorf Tearing Tester (Falling-Pendulum Type) AG11-1

Elmendorf Tearing Tester is used for testing the tearing strength of all kinds of fabrics( Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc.

Button Impact Resistance Tester AG12B

Button Impact Resistance Tester is used to determine the impact resistance of plastic sew-through flange buttons.

Crease Recovery Tester & Loading Device AG16

Crease Recovery Tester and Loading Device, is used to determining recovery performance of horizontal creases of fabrics.

Hydrostatic Head Pressure Tester AG17B

Hydrostatic Head Pressure Tester is used to determine the water penetration resistance of all kinds of fabrics used for waterproofing, such as canvas, coating cloth, tent cloth, tarpaulin, rainproof clothing and geotextile materials, etc..

Automatic Air Permeability Tester AG18B

Automatic Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials.

UV Accelerated Weathering Tester AG19

UV Accelerated Weathering Tester can simulates the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature.

Spray Rating Tester AG20

Spray Rating Tester is used to determine the water resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water.

Downproof Tester AG21

Textile Downproof Tester is used to test eiderdown, feather, fibre, and other lining material penetration through the fabric of cold protective clothing and bedclothes.