AB 1763-MM1
Panel Mounting Procedure Using Modules as a TemplateThe following procedure allows you to use the assembled modules as a templatefor drilling holes in the panel. If you have sophisticated panel mounting equipment,you can use the dimensional template provided on page 6. Due to modulemounting hole tolerance, it is important to follow these procedures:1. On a clean worksurface, assemble no more than three modules.2. Using the assembled modules as a template, carefully mark the center of allmodule-ounting holes on the panel.3. Return the assembled modules to the clean work surface, including anypreviously mounted modules.4. Drill and tap the mounting holes for the recommended M4 or #8 screw.5. Place the modules back on the panel and check for proper hole alignment.6. Attach the modules to the panel using the mounting screws.
1763-MM1 WARRANTY 12 months
Welcome to Veronica for more info:
cell: 86 18106957056(whatsapp or skype)
veronica@nseauto.com 
1763-MM1
Related products as below:
DSDO115 57160001-NF
DSAI146 3BSE007949R1
PM511V08 3BSE011180R1
ABB NDCU-51C
ABB SB510
ABB SDCS-IOE-2
ABB AC-IOE-2C
ABB HIEE300888R0001
ABB SR511 3BSE000863R1
ABB DSTX170
ABB SDCS-PIN-41A
ABB SDCS-PIN-51
ABB TC520
ABB 3BHE004573R0143
ABB 3BHE005555R0101 LD SYN-101
ABB LD MUI-01
REXROTH VT-VRPA1-50-11
REXROTH VI-VSPA2-50-10/TS
ABB CI854AK01
RDCU-02C
SDCS-CON-2B
SDCS-IOB-23
SDCS-POW-4
APOW-01C
RAPI-01C
APBU-44C
NDBU-95C
NETA-01
Our Professional & Rigorous TEST:
Complete Logistics SUPPORT:
