Technical Specifications for 20-750-2262C-2R
|
Part number
|
20-750-2262C-2R
|
|
Manufacturer
|
Allen Bradley
|
|
Country of origin
|
USA
|
|
Status
|
Brand New In Stock
|
|
Year of Production
|
2020-2022 available
|
About 20-750-2262C-2R
AB 20-750-2262C-2R PowerFlex 750 24V DC IO Option module
• Always use copper wire.
• Use wire with an insulation rating of 600V or greater.
• Separate control and signal wires from power wires by at least 0.3 meters (1.0 ft).
• For CE compliance, 115V digital input wiring must be shielded or must not exceed 30 m (98.4 ft) in length.
• Follow these guides to maintain electrical safety for all user-accessible low voltage circuits for I/O terminals that are designated for 24V or lower voltage. Standards
are safety extra low voltage (SELV) and protective extra low voltage (PELV). SELV is as defined in
IEC 61010-2-201 and PELV is as defined in IEC 61131-2.
– Do not connect to a circuit of higher voltage.
– Do not connect to a circuit that is not adequately insulated from dangerous voltages with double or reinforced insulation within other connected equipment or
wiring.
• Provide a common earth reference for all equipment that is connected to the drive. This common earth reference is to provide electrical safety for user-accessible
low voltage I/O circuits that are referenced to earth (PELV circuits) and that can be touched simultaneously.
• If the wires are short and contained within a cabinet that has no sensitive circuits, the use of shielded wire is not necessary, but is always recommended.
Our Advantage Brands
|
|
1.Allen-Bradley(AB) Series
2.Schneider(Schneider Electric) Series
3.General electric(General Electric) Series
4.Westinghouse Series
5.SIEMENS Series
6.Bosch Rexroth:Indramat, I/O module,PLC controller, Driver Module
7.Westinghouse: OVATION System, WDPF System, MAX1000 system spare parts
8.Siemens:Siemens MOORE, Siemens Simatic C1, Siemens CNC system
9.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant
|
Welcome to contact the sales manager:
Sales manager : John Yang
Mobile / WhatsApp : +86 18150117685
Email: sales3@askplc.com
Skype : sales3@askplc.com
