Product Description:
Differential inputs for applications with considerable accuracy requirement. Common Mode
Voltage up to 100 V (50 V DSAI 130A) is acceptable. These are used when it is necessary to
ground measurement circuits at different places in the system. This means you can use
transducers which require grounding of the signal zero. Fusing occurs in groups at six fuses
which can be used for an optional number of channels.
16 differential wit individually power limit transducer power supply for applications with
considerable accuracy requirements. Common Mode Voltage up to 100V (50V DSAI 130A) is
acceptable.
Scanned or interrupt-controlled 24 V d.c. inputs. You can configure the inputs for pulse
catching, that is, with filter times of 100 ms at switch-on and 2 s at switch-off. This function is
especially well suited for setting keys (push buttons).
In the connection unit, the current supply is divided into two groups of 16 channels each.
Each group has a common 0 V. This does not prevent external voltage supply and fusing for
smaller groups of channels but naturally requires that the 0 V sides can be connected. The two
groups are galvanically isolated from the internal electronics.
Welcome to contact the sales manager:
Sales manager : John Yang
Mobile / WhatsApp : +86 18150117685
Email: sales3@askplc.com
Skype : sales3@askplc.com
