Factory Supply antenna ,All Kinds Of Electronic Products

TNC Female Right Angle Bulkhead Mount Connector Crimp Solder Attachment for RG174 RG316 RG188 LMR100 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 4.3-10 Mini Din Male to N Female Straight RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

UFL IPEX Plug to SMA Male RF Coaxial Connector with 1.37mm Pigtail Cable Assembly

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

4G LTE PCB Antenna 698-960MHz 1710-2700MHz 3dBi Built-in 4G Wireless WiFi Communication Antenna with IPEX MHF UFL Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

100W DIN 7-16 Male Round RF Coaxial Connector Terminator 50ohm DC-3GHz Dummy Loads

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Female Straight Connector Bulkhead Mount Solder Attachment for RG402 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

New Low Pim 4.3-10 Mini Din Male to N Female Straight RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

UFL IPEX to SMA Female RF Coaxial Connector Assembly with 1.37mm Cable for Antenna

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

600-960MHz 1710-2700MHz 3dBi Omni Direction 4G LTE Built-in PCB Antenna with IPEX MHF Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High power 200W DIN 7-16 Male Connector square shape RF Terminator 50ohm DC-3GHz Calibration Dummy Load

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Female EZ Straight Connector Crimp for LMR400 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 4.3-10 Mini Din Female to N Male Straight RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

UFL IPEX to RP SMA Female RF Coaxial Connector Assembly with 1.13mm Cable for Antenna

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

698-960MHz 1710-2700MHz 3dBi Omni Direction 4G LTE FPC Flex Circuit Antenna with UFL IPEX MHF Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W DIN 7-16 Male RF Coaxial termination load DC-3GHz 50 ohm Dummy Load for IBS BTS DAS

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Female Straight Connector Crimp for RG223 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 4.3-10 Female to N Female Straight RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

UFL IPEX to SMA Female Right Angle RF Coaxial Connector Assembly with RG178 Cable for Antenna

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

FPC Antenna 824-960MHz 1710-2700MHz 3dBi 4G LTE Flex Circuit Antenna with IPEX MHF UFL Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W DIN 7-16 Female DC-3GHz 50 ohm RF Coaxial Termination Dummy Load

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

RP TNC Female Straight Connector Crimp Solder Attachment for RG58 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 4.3-10 Male to SMA Female Straight RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

WIFI Antenna Feeder UFL IPEX to SMA Female RF Coaxial Connector Assembly with RG178 Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

3dBi 824-960MHz 1710-2700MHz 4G LTE Interna Flexible Antena with IPEX MHF Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W DC-3G DIN 7-16 Female Wide Band RF Dummy Load Termination Load for Ibs Das

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Male Right Angle Connector Crimp Solder Attachment for RG55 RG141 RG142 RG223 RG400 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 4.3-10 Mini Din Male to 7-16 Din Male RF Connector Adapter

4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.

UFL IPEX to SMA Female PCB Mount Connector Assembly with 1.37mm Cable Assembly-7076/7053/7045/7038/7035/7034/7025/7020

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Omni Direction 698-960MHz 1710-2700MHz 4dBi N Female Connector Wall Mount Antenna for 4G LTE Communication System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

100W DIN 7-16 Female Connector RF Termination Load 50ohm Calibration 3G square Dummy Load

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Male Right Angle Connector Crimp Solder Attachment for RG59 RG62 RG71 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 2.2-5 Male to 4.3-10 Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.

UFL IPEX to SMA Female PCB Mount Connector with 1.13mm Cable Assembly

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

698-960MHz 1710-2700MHz 3-5dBi Omni Direction SMA Male Connector 4G LTE Wall Mount Antenna with 3M RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

10W DIN 7-16 Female RF Connector Dummy Load Termination 50ohm DC-3GHz Coaxial Terminator

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

TNC Male Right Angle Connector Crimp Solder Attachment for LMR400 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 2.2-5 Male to 4.3-10 Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.

WIFI Module Factory Price 3 Ways UFL IPEX to SMA Female Bulkhead Connector with RG178 Cable Assembly

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Omni Direction 698-960MHz 1710-2700MHz 3-4dBi SMA Male Connector Pole Mount 2G 3G 4G LTE Multi-band Fiberglass Antenna with RG58 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

300W DIN 7-16 Female Connector RF Termination Load 50ohm Calibration 3G square Dummy Load

Features： Wide frequency Band; Supports -105/-120/-150dBc PIM Rating; Low VSWR and excellent impedance matching; Wide frequency Band; High Reliability, IP65 & IP67 waterproof; Economic price.

All products