Specification of conductive graphene powder:
|
Graphene layer
|
1-3layer, single layer rate is greater than 80%
|
|
Carbon content
|
>98%
|
|
Rod oxygen content
|
few
|
|
Length(D50)
|
5-8um
|
|
Diameter to thickness ratio
|
9500
|
|
Apperance
|
Black grey powder
|
|
Bulk density
|
0.01-0.02g/ml
|
|
Fe
|
<=150ppm
|
|
Ni
|
<=10ppm
|
|
Zn
|
<=10ppm
|
|
Co
|
<=10ppm
|
|
Cr
|
<=10ppm
|
|
Cu
|
<=10ppm
|
Note: We can supply different size products of conductive graphene powder according to client's requirements.
1.It is made by mechanical stripping method, and has few oxygen functional groups on the surface, and has good electrical and thermal conductivity.
2.It has an extremely large diameter-thickness ratio and a small powder bulk density.
3.It has a wide range of uses and can improve the conductivity, heat conduction, heat preservation, light/heat stability, strength and wear resistance of materials.
Application of conductive graphene powder:
1.Applied to battery systems
2.Applied to other systems requiring high metal impurities
SEM & XRD of conductive graphene powder:
Storage conditions:
Conductive graphene powder should be sealed and stored in a dry and cool environment. It should not be exposed to the air for a long time, to prevent agglomeration due to moisture, affecting the dispersion performance and use effect, and should avoid heavy pressure, do not contact with oxidant, and transport according to ordinary goods.
