B2B Sourcing Platformfor of bearing, Best Sale Hardware Products Sfyh.com

China 30203 metric tapered roller bearings

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction. When the bearing is subjected to a radial load, an axial component will be generated, so when another bearing that can bear the axial force in the opposite direction is needed to be balanced.

DG406808 Automotive Gearbox Bearing

40x68x7.5mm DG406808 PRP ball bearing can used for Honda Transmission.

4-Bolt Flange Bearing Units NAFS2

NAFS Standard duty,Wider inner ring bearing, Eccentric locking,Cast gray iron housing . Cast ductile iron housing available upon request.

LM451349DW/LM451310-LM451310D Four-row Tapered Roller Bearing

Miniature metric tapered roller bearing 30302

Tapered roller bearings refer to radial thrust rolling bearings in which the rolling elements are tapered rollers. There are two kinds of small cone angle and large cone angle. The small cone angle mainly bears the combined radial and axial loads mainly with radial loads. It is often used in pairs and installed in reverse.

6308W-12RSHR4C5 Auto Rear Axle Bearing

40*90*28mm 6308W-12RSHR4C5 bearing can used for TOYOTA Transmission wheel .

3-Bolt Flange Bearing Units UCFB2

UCFB Standard duty,Flange bracket,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast ductile iron housing available upon request.

46791DW/46720-46720D Four-row Tapered Roller Bearing

China tapered roller bearing 30203

The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite).

DG4080W Auto Wheel Hub Bearing

40x80x23mm DG4080W Auto Wheel Hub Bearing can used for Suzuki wheel part.

3-Bolt Flange Bearing Units UCFB2...A

UCFB..A Standard duty,Flange bracket,Inch-based housing,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast ductile iron housing available upon request.

M238849DW/M238810-M238810D Four-row Tapered Roller Bearing

30303 tapered roller bearing manufacturer

The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)

JAPAN KOYO Automotive Ball Bearing Bearing DG358220-1 For Gearbox

Original KOYO Auto deep groove ball bearing DG358220-1 with high speed are produce with high qualtiy Chrome Steel Gcr15 ,and the size is 35*82*19.5mm ,it can be used in Japan Forester Gearbox.

3-Bolt Flange Bearing Units UEFB2

UEFB Standard duty,Flange bracket,Wider inner ring bearing,Concentric locking,Cast gray iron housing . Cast ductile iron housing available upon request.

TNT Deep Groove Ball Bearing SC04B19CS30PX1

SC 04B19 CS30PX1/3ASQHK is single row deep groove ball bearin with size 20*56*12mm .

802227 Four-row Tapered Roller Bearing

small tapered roller bearing 32203

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

3-Bolt Flange Bearing Units SBFCT2 SAFCT2

SBFCT/SAFCT Light duty,Ductile iron housing,Setscrew/Eccentric locking

Enduro Bike Bearings MR24377-2RS

Bike Bearing MR24377-2RS with size 24*37*7mm are produce with Chrome steel Gcr15 and can fit with Hollowtech bottom brackets.

HM265049DW/HM265010-HM265010D Four-row Tapered Roller Bearing

metric taper roller bearing 32303

This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed.

2-Bolt Flange Bearing Units UCFL2

UCFL Standard duty,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

China Chrome Steel 609ZZ Bearing

608 ZZ bearing with size 9*24*7mm are produced with Chrome steel ,we can offer with a competitive price.

DU60108-8CS32 Truck Wheel Hub Unit for VOLVO MB

thin section taper roller bearing 32904

Thin section Tapered roller bearings 32904 are separate bearings. inner diameter is 20mm, outer dimater is 37mm,width is 12mm.

2-Bolt Flange Bearing Units NAFL2

NAFL Standard duty,Wider inner ring bearing, Eccentric locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

805012.H195-BTH0053-VKBA5397-SET1242 Truck Wheel Hub Unit Bearing for DAF IVECO IRISBUS

805012.H195-BTH0053-VKBA5397-SET1242 Truck Wheel Hub Unit Bearing

HTF B27Z-9 Deep Groove Ball Bearing

27.5x79x17.5mm HTF B27Z-9 Deep Groove Ball Bearing is produced Chrome steel Gcr15 can used for Auto Gearbox.

Most used taper roller bearing 32004

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

2-Bolt Flange Bearing Units UEFL2

UEFL Standard duty,Wider inner ring bearing, Concentric locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

F566426.H195-VKBA5423-3988673 Truck Wheel Hub Bearing for VOLVO DAF RENAULT

F566426.H195-VKBA5423-3988673 Truck Wheel Hub Bearing

6008-2RS 6008-ZZ Ball Bearings

40*58*15mm 6008 Deep Groove Ball Bearing produced with Chrome steel Gcr15 ,we have bearings in stock now can with fast delivery .

30204 tapered roller bearing suppliers

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

2-Bolt Flange Bearing Units UKFL2

UKFL+H Standard duty,Tapered bore,Adapter sleeve locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

BTH0018-VKBA5314-201037-NP078914-571762.H195 Truck Hub Unit Bearing for SCANIA DAF MAN

BTH0018-VKBA5314-201037-NP078914-571762.H195 Truck Hub Unit Bearing

deep groove ball bearing 6001,6001-2RS,6001-2Z

Deep groove ball bearings were originally listed as radial ball bearings, which are the most widely used rolling bearings. It is characterized by low friction resistance and high speed.