best dual extruder 3d printer-sfyh.com

Tenlog TL-D3S Dual Nozzle 3D Printer Building Volume 300mm300mm*400mm

(Stop Production)Our TL-D3S Dual Nozzle 3D Printer is upgraded from a single-nozzle 3D Printer Kit with a building volume of 300mm*300mm*400mm, which is not reduced but doubles in printing efficiency. It is a pre-assembled 3D Printer Kits that can be easily assembled in less than 5 minutes. It supports Double-Color printing mode, the parameters of the double nozzles can be set separately, such as Temperature, Extruder Speed, Printing Speed, and Infill Density. Even you can use two nozzles of different diameters at the same time. Give you more free DIY space.

Tenlog TL-D3 Pro Independent Dual Extruder DMP 3D Printer with Touch Screen Support PVA TPU ABS PLA

Our TL-D3 Pro Dual Extruder 3D Printer has Double Nozzles that are independent of each other, allowing it to be printed in Duplication and Mirror mode. You can also choose double different colors or materials to create at the same time. or print soluble support(such as PVA) to precisely implement models that are difficult to lay down. Thanks to the new DMP3d printing system, TL-D3 Pro gives you better creative space and double productivity!

Tenlog Multi Nozzle 3D Printer Motherboard with DMP 3D Printing System Support Multi Nozzle Printing

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The Tenlog motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for Tenlog Dual Extruder 3D Printer.

Full Color Touch Screen for Tenlog Dual Extruder 3D Printer

4.3-inch full color touch screen

Tenlog TL-D5 Big Dual Filament 3D Printer Building Volume 500mm500mm*500mm

The Tenlog TL-D5 Dual Filament 3D Printer brings a large building volume 500*mm*500mm*500mm, giving you more creative space. It has 2 Z-axis metal supporting rod to reduce a lot of sway and make the printing platform more stable during printing.

Tenlog TL-D6 Best Dual Extruder 3D Printer Large Format 600mm600mm*600mm

Tenlog TL-D6 Best Dual Extruder 3D Printer It reaches the maximum limit of the frame printer. Super Large Format building volume is 600*mm*600mm*600mm. It has 2 Z-axis metal levers to reduce a lot of sway and make the printing platform more stable during printing. Compared with the all-metal double nozzle, it brings a super low price. It is a cheap double-nozzle large printer but it runs stably and the printing object has high precision.

0.2mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

Tenlog 3D Printer Double Head Extruder & Nozzle Kits with Extrusion Motor Support Rapid Disassembly to Replace Nozzle Kits

Tenlog 3D Printer Double Head EXtruder & Nozzle Kits, also called Tenlog Quick Disassembly Replacement Nozzle Kits. Each kits requires only 4 screws to replace the entire nozzle and extruder kits.

Tenlog 3D Printer Photoelectric Sensors Positioning Accuracy up to 0.025mm

All Tenlog Double Extrusion 3D Printers use high precision 3D printer sensors, the Photoelectric Sensors.

Tenlog Dual Extruder 3D Printer Mechanical Micro Switch(Limit Switch)

This is Y-axis Stoper, Y-axis just go to zero at the begin of the printing.

Tenlog 3D Printer Ball Slide for Dual Extruder 3D Printer

The ball slides slide smoothly and have a long service life and easy maintenance. Only regular grease or lubricant is required.

0.2mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

Tenlog 3D Printer Nozzles 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

Here you can find 3D printer nozzles of all types and sizes. When you place an order, buy more nozzles, no longer worry about nozzle clogging, no need to spend time cleaning the nozzle.

Tenlog 3D Printer Hot Bed 24V MAX Temperature 80℃

Its working voltage is 24V and the maximum temperature is 80 degrees.

Tenlog Dual Extruder 3D Printer Cooling Fan Used for Cool Printed Object Dissipate Heat and Motherboard

The normal fan on the left is used to cool the heat sink in the nozzle kit. The turbofan on the right provides more airflow for cooling printed objects and reducing the cooling time of the filaments.