Cast iron angle globe valve 10k

Cast iron angle globe valve 10k

The angle shut-off valve opener is a plug-shaped disc with a flat or conical sealing surface. The disc moves straight along the center line of the fluid. The movement of the stem form, there are lift rod type (stem lift, handwheel not lift), there is also lift rotary rod type (handwheel with stem rotation lift, nut located on the body). The striated globe valve is only suitable for full opening and closing and is not allowed to be adjusted and throttled.

The heat preservation angle globe valve belongs to the forced seal type valve, so when the valve is closed, the pressure must be applied to the disc to force the sealing surface not to leak. When the medium enters the valve six from the bottom of the disc, the resistance to the operating force is the friction force of the stem and packing and the thrust produced by the pressure of the medium. From the self-sealed valve appears, the flow of the globe valve media from the disc to enter the valve chamber, when the medium pressure action, close the valve force is small, and open the valve force, stem diameter can be reduced accordingly. At the same time, under the action of medium, this form of valve is also more tight. China valve "three to" has stipulated that the flow of globe valves, all use top-down

Packing & Delivery : 

Packing Details  : All Cast iron angle globe valve by seaworthy plywood case and packed strongly by packing belt as below

Delivery Details : Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.