CE 12v 36w constant voltage 0-10v dimming led light driver
12v 36w constant voltage 0-10v dimming led light driver;36w constant voltage 0-10v dimming led light driver
- Input Voltage100-130VAC, 170-265VAC
- Output Voltage36W
- Output Current3A
- Working ModeConstant Voltage
- CertificationCE ROHS
- Warranty3 years
Product parameters
Model |
SMT-012-036VD |
SMT-024-036VD |
|
Output |
DC Voltage |
12VDC |
24VDC |
voltage Accuracy |
±3% |
||
Current |
3.0Amp |
1.5Amp |
|
Rated power |
36W |
36W |
|
Input |
Voltage Range |
100-130VAC, 170-265VAC |
|
Frequency Range |
47~63HZ |
||
PF(Typ.) |
PF>0.90 |
||
Full Load Efficiency(Typ) |
>88% |
>89% |
|
AC Current (Typ.) |
0.41A@110VAC |
0.21A@220VAC |
|
Leakage current |
﹤0.62mA/110VAC, ﹤0.65mA/220VAC |
||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|
Over voltage |
≦280VAC |
||
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||
Environme |
Working TEMP. |
-40~+50℃ |
|
Working Humidity |
20~95%RH,non-condensing |
||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. Waterproof rate: IP40 |
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||
Others |
Weight |
0.4Kg |
|
Size |
180*60*34mm(L*W*H) |
||
packing |
355*215*215mm/20pcs /CTN |
||
Notes |
1. All parameters NOT specially mentioned are measured at 110v~220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
||
Label |
![]() |
![]() |
![]() |
![]() |
![]() |
Features
- High efficiency,save energy ,protected environment.
- High stability and low ripple, increase light efficiency and decrease light attenuation.
- Meet to safety standard and EMC
- Assure LED stability long lift and light efficiency by constant voltage
- Protections:Short circuit/Overload/Over temperature
- Cooling by free air convection
- 100% full load burn-in test.
- Suitable for LED lighting
- Brand electrotronic components.
- ROHS material.
Environment
- Working temp: -30~+50℃ (Refer to output load derating curve)
- Working humidity: 20~99% RH non-condensing(Waterproof)
- Storage temp. humidity: -40~+80℃,10~99%RH
Safety
- Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved
- Withstand Voltage : I/P-O/P: 3000KVAC
- Isolation Resistance : I/P-O/P:100M Ohms/500VDC
Application
- Indoor LED illuminating lights
- LED Neon, LED urban Decoration
- LED Lighting Advertising,LED Display
- Safety Protection Apparatus
- Telecommunications, Networks
- Vehicle Lights, Controller Panels