Skyward telecom-sfyh.com

SM-ES3G-16-P Enhcd EtherSwitch. L2/L3. SM. 16GE. POE

The Cisco Enhanced EtherSwitch Service Module helps ensure maximum availability, high performance, ease of upgrade, and expandability. The modules have their own processors, switching engines, and flash memory that run independently of host router resources, helping ensure maximum concurrent switching and routing performance as well as providing security, and increased ease of management.

SM-NM-ADPTR Network Module Adapter for SM Slot on Cisco 2900. 3900 ISR

Network Module Adapter for SM Slot on Cisco 2900, 3900 ISR.

SM-SRE-710-K9 SRE 710 (4GB MEM.500GB 7K HDD.1C CPU) for router bundle

The Cisco Services-Ready Engine (SRE) modules are router blades for the Cisco Integrated Services Routers Generation 2 (ISR G2) that provide the capability to host Cisco, third-party, and custom applications. SM-SRE-710-K9 is supported by Cisco 2911, 2921, 2951, 3925, 3925E, 3945, and 3945E Integrated Services Routers.

SM-X-4X1G-1X10G= SM-X module with 4-port dual-mode GE/SFP or 1-port 10G SFP+

Cisco Gigabit Ethernet WAN Modules bring high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.The ports on these modules work as routed Layer 3 ports. Layer 2 switching between local ports on the module or between ports on the module and other ports within the router system is not supported. The port terminates Layer 2 trunks from externally connected switches, and Layer 2 trunk and VLAN information is not switched onto other ports in the system. The host router routes all traffic entering these modules.

SM-X-6X1G SM-X module with 6-port dual-mode GE / SFP

Cisco SM-X-6X1G Gigabit Ethernet Service Module brings high density Small Form-Factor Pluggable (SFP) and copper (RJ-45) Gigabit Ethernet (GE) connectivity to the Cisco 4400 series Integrated Services Routers (ISRs). It accelerates applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers and provides maximum flexibility.The ports on the Cisco SM-X-6X1G Service Module work as routed Layer 3 ports. Layer 2 switching between local ports on the module or between ports on the module and other ports within the router system is not possible. The port terminates Layer 2 trunks from externally connected switches, and Layer 2 trunk and VLAN information is not switched onto other ports in the system. The host router routes all traffic entering the Cisco SM-X-6X1G.

SM-X-ES3-24-P SM-X EtherSwitch. L2/L3. SM. 24 GE. POE+

The Cisco SM-X Layer2/3 EtherSwitch Service Module helps ensure maximum availability, high performance, ease of upgrade, and expandability. The modules have their own processors, switching engines, and flash memory that run independently of host router resources, helping ensure maximum concurrent switching and routing performance as well as providing integrated PoE+, security, and increased ease of management.As users attempt network access through the Cisco Enhanced EtherSwitch Service Module, the module can use IEEE 802.1x and a large number of Cisco 802.1x extensions to validate the credentials of the end device and place the user in the appropriate VLAN or Cisco TrustSec group. As the end-user data traverses between the switch module and other network entities or between buildings, this traffic can be encrypted at Layer 2 using MACsec.

SM-X-NIM-ADPTR SM-X Adapter for one NIM module for Cisco 4000 Series ISR

The SM-X-NIM-ADPTR acts as a carrier card for the Cisco 4000 Series ISRs to carry one single-wide or double-wide network interface module (NIM) to be used in the ISRs SM slot. The SM-X-NIM-ADPTR converts the SM slot on the ISR to a NIM slot and facilitates the use of NIMs such as the T1/E1 (Voice/Data), FXO/FXS, Switching, Serial, Storage Drives, Mobility (3G/4G), or G.HDSL.

XFP-10GLR-OC192SR Multirate XFP module for 10GBASE-LR and OC192 SR-1

XFP-10GLR-OC192SR - Cisco Multirate 10GBASE-LR/-LW and OC-192/STM-64 SR-1 XFP Module for SMF, low power (1.5W).

PVDM4-256 256-channel DSP module

High-density voice connectivity. Conferencing, transcoding, and transrating.

SPA-1X10GE-L-V2= Cisco 10-Port Gigabit Ethernet Shared Port Adapter

Cisco 10-Port Gigabit Ethernet Shared Port Adapters, Version 2, are available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology.Gigabit Ethernet interfaces are commonly used to interconnect routers or other devices within a central office or data center or in a metropolitan-area network (MAN). Cisco offers an extensive variety of 1000BASE-X GE SPAs to meet customer needs for various applications. With Cisco GE SPAs, users can mix and match SPA ports with other types of interfaces in the same slot. Each SPA provides standards-based Gigabit Ethernet implementation for compatibility and interoperability.

SPA-1XOC3-ATM-V2 1 port OC-3c/STM-1 ATM Shared Port Adapter

1 port OC-3c/STM-1 ATM Shared Port Adapter

C9200L-24P-4G-A Catalyst 9200L 24-port PoE+, 4 x 1G, Network Advantage

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments.

C9200L-24P-4G-E Catalyst 9200L 24-port PoE+, 4 x 1G, Network Essentials

Catalyst 9200L 24-port PoE+ 4x1G uplink Switch, Network Essentials, Need to order DNA License.

STACK-T4-50CM 50CM Type 4 Stacking Cable

50CM Type 3 Stacking Cable.

SPA-2GE-7304 2pt Half-Height GigEthernet Shared Port Adapter

2pt Half-Height GigEthernet Shared Port Adapter

C9500-24X-E Catalyst 9500 16-port 10G, 8-port 10G switch

The Cisco Catalyst 9500 Series Switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability.

SPA-2X1GE 2pt Gigabit Ethernet Shared Port Adapte

Cisco 2-port Gigabit Ethernet Shared Port Adapter

SPA-5X1GE-V2 Cisco 5-Port Gigabit Ethernet Shared Port Adapter

The Cisco SPA-5X1GE-V2 is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA portfolio allows deployment of different interfaces (Packet over SONET/SDH [PoS], ATM, Ethernet, etc.) on the same interface processor.

SPA-8X1FE-TX-V2 Cisco 8-Port Fast Ethernet (TX) Shared Port Adapter

The Cisco 8-Port Fast Ethernet shared port adapter (SPA) is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor. Fast Ethernet interfaces are commonly used to interconnect routers or other devices within a central office or data center or in a metropolitan-area network (MAN). With Cisco FE SPAs, users can mix and match SPA ports with other types of interfaces in the same slot. Each SPA provides standards-based Fast Ethernet implementation for compatibility and interoperability.

SPA-8X1GE-V2 Cisco 8-Port Gigabit Ethernet Shared Port Adapter

IEEE 802.3z, IEEE 802.1Q, IEEE 802.3x, IEEE 802.1ad

C9500-40X-A Catalyst 9500 40-port 10Gig switch, Network Advantage

The Cisco Catalyst 9500 Series Switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability.

C9500-16X-E Catalyst 9500 40-port 10Gig switch, Network Advantage

The Catalyst 9500 Series is the industry's first purpose-built 40 Gigabit Ethernet line of switches targeted for the enterprise campus.

C9500-16X-A Catalyst 9500 16-port 10Gig switch, Advantage

The Catalyst 9500 Series is the industry's first purpose-built 40 Gigabit Ethernet line of switches targeted for the enterprise campus.

SPA-8XOC12-POS 8-port OC12/STM4 POS Shared Port Adapters

The Cisco 8-Port OC-12 POS SPAs SPA-8XOC12-POS is available on high-end Cisco Systems routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (Packet over SONET/SDH [POS], ATM, Ethernet, and so on) to be deployed on the same interface processor.

C9500-48X-A Catalyst 9500 48-port 10G bundle, Network Advantage

The Catalyst 9500 Series is the industry's first purpose-built 40 Gigabit Ethernet line of switches targeted for the enterprise campus.

SPA-8XCHT1/E1-V2 8-port Channelized T1/E1 to DS0 Shared Port Adapter

The Cisco SPA-8XCHT1/E1-V2= is ideal for service providers and large enterprises looking to cost-effectively deploy high-density terminations of multiple remote sites.

SPA-OC192POS-SFP Cisco ASR 9000 Adapter, SPA-OC192POS-XFP, 1-port OC192/STM64 POS/RPR XFP Optics

The Cisco 1-Port OC-192 POS SPA SPA-OC192POS-XFP is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades.

VIC2-2BRI-NT/TE Two-port Voice Interface Card - BRI (NT and TE)

Cisco offers a wide variety of connectivity, expansion and upgrade modules to accommodate the range of application needs in customer networks. The network modules assure customers that they can choose a connectivity solution that fits their requirements. As modular components, they are easily and inexpensively field-upgradeable as customer requirements change.

VIC2-2E/M 2pt Voice Interface Card - EandM

Cisco IP Communications solutions provide the means for integrating voice and data allowing users to take advantage of services such as IP telephony, integrated services, and toll-bypass. These solutions allow enterprises, managed network service providers, and service providers to reap the advantages of Unified Communications such as lower operating costs and increased productivity. Cisco Unified Communications solutions also enable packet voice technologies including voice over IP (VoIP) (including H.323, Media Gateway Control Protocol (MGCP), and Sessions Initiation Protocol (SIP), voice over Frame, voice over ATM (including AAL2 and AAL5 adaptation layers).

VIC2-2FXS 2pt Voice Interface Card

2pt Voice Interface Card

VIC3-2E/M Two-port Voice Interface Card - E and M

Cisco VIC3-2E/M Ear and Mouth (E&M) interface card support tie-line facilities or signals between telephone switches. It provides the connection between the PBX system and the Cisco router, and integrates VOIP with the legacy voice solution.

C9200L-24P-4X-A Catalyst 9200L 24-port PoE+, 4 x 10G, Network Advantage

Catalyst 9200L 24-port PoE+ 4x10G uplink Switch, Network Advantage, Need to order DNA License.

VIC3-2FXS/DID Two-Port Voice Interface Card- FXS and DID

The FXS (foreign exchange station) port is used to connect directly to phones, fax machines, and key systems. Generates battery polarity reversal and caller ID.The DID (direct inward dial) port is used to provide off-premises DID connection from central office.

VIC-4FXS/DID 4pt FXS or DID VIC

Cisco IP Communications solutions provide the means for integrating voice and data allowing users to take advantage of services such as IP telephony, integrated services, and toll-bypass. These solutions allow enterprises, managed network service providers, and service providers to reap the advantages of Unified Communications such as lower operating costs and increased productivity. Cisco Unified Communications solutions also enable packet voice technologies including voice over IP (VoIP) (including H.323, Media Gateway Control Protocol (MGCP), and Sessions Initiation Protocol (SIP), voice over Frame, voice over ATM (including AAL2 and AAL5 adaptation layers).

VS-S2T-10G Cat 6500 Sup 2T with 2 x 10GbE and 3 x 1GbE with MSFC5 PFC4

VS-S2T-10G is Cisco Catalyst 6500 Series Supervisor Engine 2T. The Supervisor Engine 2T is designed to deliver higher performance, better scalability, and enhanced hardware-enabled features. Supervisor Engine 2T integrates a high-performance 2-Terabit crossbar switch fabric that enables 80 Gbps switching capacity per slot on all Cisco Catalyst 6500 E-Series Chassis. This VS-S2T-10G is similar with the VS-S2T-10G=. The VS-S2T-10G= is a spare one.

Company profile

All products