All products
IEC EMI Power Filter with Switch and Fuse Holder
IEC EMI filters rated currents up to 10A. Rear/front or snap-in mounting. Custom-specific versions are available on request. Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.
IEC EMI Filter Power Entry Module with Fuse Holder
Power entry module EMI filter with fuses. Rear/front or snap-in mounting. Custom-specific versions are available on request. Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.
Military Single Phase DC EMI Filters
Military electronic installation filters. Excellent performance at high and low frequency. Type: DC. Rated current from 1A to 10A. Test Voltage ( 1min ): Line to Ground: 700VAC. Line to Line:400VDC.
440VAC Military Single Phase Filters Rated Current 50A
Military DC filters design. Excellent performance at high and low frequency. Type: DC. Rated current from 10A to 50A. Test Voltage ( 1min ): Line to Ground: 2250VAC. Line to Line: 1500VDC.
250VAC Military Filters Single Phase Military RF Filters
Customized military EMC filters. High quality components, high performance/cost. Type: single phase. Rated current from 1A to 10A. Test Voltage ( 1min ): Line to Ground: 1500VAC. Line to Line: 1500VDC.
120VAC 6A PCB Through Hole Mounting EMI Filters
Custom PCB mounting EMI filters. Rated currents from 0.5 to 10A. Optional metal or plastic housing. Test voltage(1min): Line to ground : 2000VAC; Line to Line : 1450VDC. Optional DC version(D type). Mainly for single-phase power supplies, switch-mode power supplies.
10A 120V Single Phase Single Stage EMI Filters
Single phase EMI noise filters. Rated currents from 1A to 10A. Low leakage current and high quality components ensure the safety and reliability of filters. Various terminal options: faston/screw/wire.
Single Stage EMI Filter Single Phase AC Noise Filter
Single phase single stage noise filters. Rated currents from 6A to 100A. Low leakage current and high quality components ensure the safety and reliability of filters. Various terminal options: faston/screw/wire.
Single Phase Double Stages EMI Power Line Noise Filter
Single phase two stage noise filters. MCT2S7 two-stage filters are designed for noisy applications requiring good differential and common-mode attenuation. Rated currents from 1A to 35A. Easy and fast chassis mounting. Various terminal options: faston/screw/wire.
Single Phase High Performance EMI Filter for Inverter
Single phase power filters. High performance with differential mode choke. Good low frequency attenuation. Good performance for inverter and kinds of speed motor apparatus, which meet the RFI electromagnetic compatibility of Euro standards. Welcome for customized products.
250/440VAC General Purpose Three Phase Three Line EMI Filters
Three phase three line EMI filter 10A 200A. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Excellent interference suppression performance for CM and DM.
6A-10A Three Phase Four Line Drive EMI Filters
250/440VAC EMI power line three phase filter. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Line to Neutral:1450VDC. Excellent interference suppression performance for CM and DM.
AC Three Phase Four Line EMI RFI Noise Filters
30A/50A/300A 440VAC three phase four line filter. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Line to Neutral:1450VDC. Excellent interference suppression performance for CM and DM.
DC EMI Filters For Switching Power Supply
DC EMI filter is designed for DC power line. IT has excellent differential,common-mode attenuation. High performance,easy to install. We accept custom design EMI filters.
80A 100A Specialized For Household Appliance DC EMI Noise Filter
DC EMI filter mainly used in electric power supply, data system, testing equipment, digital system and other consumer electronics. Always designed for DC power line.
EMI Soft Ferrite Core for EMI Suppression
Customized EMI ferrite core noise filter, which has the ability to receive an electrostatic pulse absorbing EMI absorption ring, the electronic equipment to achieve electromagnetic compatibility (EMI / EMC ) and the corresponding international standard electrostatic discharge.
250VAC 100A Shielding Feedthrough Capacitors EMI Filter
Feedthrough EMI filter for shielded rooms. Feedthrough capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. High quality and reliability. Mainly for power supplies, switching and cellular equipment, computer servers, etc.
60A 250VAC Magnetic Latching Relay For Smart Energy Meters
Low 60A high contact load capacity.Low switching power 15 KVA.Low power consumption,save electricity.Strong impact resistance,high reliability.Provide one coil with double coil relay.
Magnetic Latching Relay 80A 250VAC For Automatic Meter Reading System
Magnetic latching relay contact capacity:80A 250VAC. Dielectric strength(VAC):4000VAC.Permanent magnetic strength to keep stability,save power consumption.
Magnetic Latching Relay 100A 250VAC For Intelligent Electric Meter
Magnetic Latching Relay has large switching power,low 100A high contact load capacity,low switching power 25 KVA.Contact capacity:100A 250VAC,Coil power(W):1.0W
General Purpose Household Appliances Power Electromagnetic Relay
Contact capacity2C/3C:7A 250VAC/30VDC 4C:5A 250VAC/30VDC, Coil power(W)0.9W,1.2VA, Dielectric Strength(VAC):1500VAC
General Purpose Power Relay with 10A Switching Capacity
General purpose power relays. Contact capacity:1C:15A 250VAC/30VDC 2C:10A 250VAC/30VDC Coil power(W):0.9W,1.2VA. Dielectric Strength(VAC):1500VAC. Product Size: 28×21.5×35
SMD Shielded Power Inductor PQ Type High Current Chokes
PQ type SMD large current shielded inductor. We design this power inductor wieh PQ20/16 ferrite core, wingding with flat copper-single layer. Operation temperature: -40°to+125°C. Less temperature rise. Mainly for motherboards, laptop, desktop computers. DC/DC converter in distributed power systems.
High Current DIP Type Inductor High Frequency Power Inductor
DIP type high frequency inductor has low cost, shielded construction, very low DC resistance. It’s easy customized and high frequency range can up to 1.0 MHz. Our large current products are all lead-free. (RoHS)
DIP High Current Inductors for EMI Filters
MCTLB series DIP type large current inductor with shielded construction, has very low DC resistance, easy customized, high frequency range can up to 1.0 MHz. Our large current products are all lead-free. (RoHS)
Large Current DIP Inductor low Resistance and High Frequency
DIP type high current inductor has very low DC resistance, mainly for motherboards, laptop, desktop computers. DC/DC converter in distributed power systems. Inductor for general purpose use.
DIP Power Inductor for Shielded Large Current
DIP large current inductor has low resitance and high frequency. mainly for motherboards, laptop, desktop computers. DC/DC converter in distributed power systems.
Large Current Inductor DIP Shielded Power Inductor
DIP large current inductor has low resitance and high frequency. mainly for motherboards, laptop, desktop computers. DC/DC converter in distributed power systems.
10BASE-T Lan Transformer Surface Mount Isolation Transformer
LAN transformer and filter modules for network filter. We design different lan transformers to meet or exceed IEEE 802.3, 10Base-T specifications. Electrical Specifications @ 25°C. Operating temperature 0°C~70°C. Surface mount, IC grade, transfer-molded package withstands 235°C peak temperature profile.
