cwdm sfp transceivers-sfyh.com

SFP CWDM 10G 1350~1450nm 20km Coarse Wavelength Division Multiplexing

This CWDM DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km. The transceiver consists of two sections: The transmitter section incorporates a DFB laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Cisco Asa CWDM Fiber 10G 1270~1610nm 40km GBIC Module

This SFP+ ER CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Cisco CWDM 10G 1470~1610nm 80km SFP GBIC Ethernet Lan Cards

This SFP+ ZR CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

SFP DWDM 10gb Optial Module Tunable 40km Huawei Modem

Top-Trans 50GHz Full C-band Tunable SFP+ transceivers are designed for use in 10Gb/s to 11.1Gb/s 50GHz DWDM links up to 40km of G.652 fiber. The SFP+ module supports 10GBASE-ER and –EW applications for Ethernet Switches, IP Routers or SONET/SDH optical interfaces. Digital Optical Monitoring interfaces are provided via the SFP+ standards compliant I2C interface.

Cisco Compatible 10G LR Ethernet XFP CWDM 1270-1450nm 10km Transceiver Module

10G CWDM XFP LR Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 10.3125Gbps(10GBASE-LR) or 9.953Gbps 10GBASE-LW), and transmission distance up to 10km on SMF. The transceiver module comprises a transmitter with un-cooled CWDM DFB laser and a receiver with a PIN photodiode. Transmitter and receiver are separate within a wide temperature range of 0℃ to +70℃ and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities for 10 GbE systems.

10GBASE-ER CWDM XFP 1270~1610nm 40km Singlemode Cisco ASR 9000 Series Transceiver Modules

Cisco/Juniper/Huawei Comptiable 10G XFP CWDM ER Modules supporting operation at 100 GHz channel, cost effective module. It is designed for 10G CWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. The CWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Juniper Networks EX-XFP-10GE-ZR80 Compatible 10G CWDM XFP ZR 1470-1610nm 80km DOM Transceiver Module

XFP 10G 80KM CWDM transceivers are de-signed for 10G Ethernet10GBASE-ZR/ZW 802.3ae and10GSOIOC-192/SDHSTM-64,and it can support data-rate from9.953Gb/s to 11.1Gb/s. Digital diagnostics are available via I2C interface as specified in the XFPMSA.The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-command telecom applications.

Foundry Networks Compatible 10G CWDM XFP 1470-1610nm 120km DDM Transceiver Module

XFP 10G 120KM CWDM transceivers are de-signed for 10G Ethernet10GBASE-ZR/ZW 802.3ae and10GSOIOC-192/SDHSTM-64,and it can support data-rate from 9.953Gb/s to 11.1Gb/s. Digital diagnostics are available via I2C interface as specified in the XFPMSA.The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-command telecom applications.

Cisco 10GBASE Double Fiber CWDM XFP 1310nm 40km Compatible Transceiver Module

Topstar TOP-XFP-CWDM-ER-XX is Transceiver exhibits excellent wavelength stability, supporting operation at 100 GHz channel, cost effective module. It is designed for 10G CWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements.The CWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

SFP Transceiver Manufacturers CWDM 1.25G 1270-1610nm 40km Cisco Fiber Optic Router

SFP 1.25G 40KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

SFP WDM Module CWDM 1.25G 1270-1610nm 80km Fiber Optic

SFP 1.25G 80KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

SFP CWDM Transceiver 1.25G 1270-1610nm 120km Fiber Optic Converter

SFP 1.25G 120KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Mini GBIC CWDM 2.5G 1270-1610nm 40km Switch 8 port SFP Optical Transceiver

TOP-CWDM-XX-2.5-40 optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Cisco Router 1900 Series 2.5G 1270-1610nm 80km CWDM DWDM SFP Transceiver

TOP-CWDM-XX-2.5-80 optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Cisco Router Price 2.5G 1430-1610nm 120km Optical Oadm Cwdm Multiplexer

SFP 2.5G 120KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Industrial SFP CWDM 4.25G 1310-1610nm 40KM Optical Fwdm Gigabit Switch

SFP 4.25G 40KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Mux CWDM 8.5G 1270-1570nm 10KM Gigabit Ethernet Optical Fiber Switch

SFP 8.5G 10KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

Network Routers CWDM 8.5G 1270-1470nm 20KM Fiber SFP Channel Transceiver

SFP 8.5G 20KM CWDM optical transceivers are designed for optical interfaces for data communications with single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

25G 40KM CWDM 1270-1610nm Optical Module Fiber Equipment

25G 40KM CWDM 1270-1610nm Optical Module Fiber Equipment,the wavelength is from 1270 to 1610nm,it support DDM,Duplex LC connector. More details please check our website: https://www.opticalmodulemanufacturers.com/

SFP28 25G 80KM CWDM 5G networking transceiver Optical fiber Equipment

25G 80KM CWDM 1270-1610nm Optical Module Fiber Equipment,the wavelength is from 1270 to 1610nm,it support DDM,Duplex LC connector. More details please check our web.https://www.opticalmodulemanufacturers.com/