Model No.:
|
YX-P4
|
Pixel pitch:
|
4mm
|
LED encapsulation:
|
SMD2521
|
5Resolution:
|
62500dots/m2
|
Brightness:
|
≥6000nit
|
Cabinet size:
|
512x512x64mm
|
Cabinet weight:
|
10kg
|
Average powe consumption:
|
≤600w/m2
|
Best viewing angle:
|
H:160° V:120°
|
Refresh rate:
|
360-4800Hz
|
Grey scale:
|
14-16bit
|
Best viewing distance:
|
1.5-50m
|
Protection Level:
|
IP60
|
Cabinet Material:
|
Die-casting Aluminum
|
Operating Voltage:
|
AC220V/50Hz
|
Outdoor all-weather environment and rental use. High brightness, high protection rating and high stability.
Characteristics:
General Module which will make the display very flat and minimum gap between modules endow your LED display with an high-end products.
1. Special design which can make our LED panel both front and rear side maintainance accessible. This will greatly cut down the maintain cost.
2. Ultra high brightness (8000 Nit) with low power consumption (500W/M2).
3. High refresh rate (greater than 3840 Hz) with software adjustable, suitable for filming.
4. High grayscale (15 bits) with perfect visual performance.
5. High Contras ratio (2000:1) with black mask and black coating technique.
6. Wide viewing angle (greater than 140 °in horizontal).
7. IP65 protection rating.
8. Fast and easy to assemble and dismantle.
9. High reliability and long lifespan (MTBF ≥ 5000 hours).
Optional for upgrade:
1. Ultra-High refresh rate (greater than 1000 Hz) with software adjustable, suitable for filming.
2. High grayscale (16bits) with realistic visual performance.
3. On-site pixel by pixel brightness and color correction bring greater uniformity.
Warranty:
1.We guarantee all our display, modules, spare parts (Silan Chip) for TWO years.
2.We provide technology training for free, which contains the operation and maintenance training of the LED screens in the factory.
3.After warranty , we also can offer you the parts for replacement at our bottom price.
4.After sales, if you have any problem about our product, you can inform us by Email, we will reply you at once when we get it and offer you a good solution to solve the problem.
5.We also could solve problems for you until it recovers well by remote control!
Delivery Time:
1.Delivery time: Accomplish manufacturing within 25 days after receiving the deposit.
2.Before delivery, we will test the display, and keep it light up for 72 hours, and check all the parts of the display to confirm it is Ok for delivery.
Installation:
1.We can assist the training and technical support for the customer in the factory, if the customer requires so.
2.We could send our engineer to guide the installation for you. But the relevant cost should be paid by your esteemed company.
3.Our technicians will offer CAD Drawing to show how to install the LED Display rightly and fast, of course, if you need