Special Offers
Products
Tenlog TL-D3S Dual Nozzle 3D Printer Building Volume 300*mm*300mm*400mm
(Stop Production)Our TL-D3S Dual Nozzle 3D Printer is upgraded from a single-nozzle 3D Printer Kit with a building volume of 300mm*300mm*400mm, which is not reduced but doubles in printing efficiency. It is a pre-assembled 3D Printer Kits that can be easily assembled in less than 5 minutes. It supports Double-Color printing mode, the parameters of the double nozzles can be set separately, such as Temperature, Extruder Speed, Printing Speed, and Infill Density. Even you can use two nozzles of different diameters at the same time. Give you more free DIY space.
Tenlog TL-D3 Pro Independent Dual Extruder DMP 3D Printer with Touch Screen Support PVA TPU ABS PLA
Our TL-D3 Pro Dual Extruder 3D Printer has Double Nozzles that are independent of each other, allowing it to be printed in Duplication and Mirror mode. You can also choose double different colors or materials to create at the same time. or print soluble support(such as PVA) to precisely implement models that are difficult to lay down. Thanks to the new DMP3d printing system, TL-D3 Pro gives you better creative space and double productivity!
Tenlog Multi Nozzle 3D Printer Motherboard with DMP 3D Printing System Support Multi Nozzle Printing
We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The Tenlog motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for Tenlog Dual Extruder 3D Printer.
Full Color Touch Screen for Tenlog Dual Extruder 3D Printer
4.3-inch full color touch screen
Tenlog TL-D5 Big Dual Filament 3D Printer Building Volume 500*mm*500mm*500mm
The Tenlog TL-D5 Dual Filament 3D Printer brings a large building volume 500*mm*500mm*500mm, giving you more creative space. It has 2 Z-axis metal supporting rod to reduce a lot of sway and make the printing platform more stable during printing.
Tenlog TL-D6 Best Dual Extruder 3D Printer Large Format 600*mm*600mm*600mm
Tenlog TL-D6 Best Dual Extruder 3D Printer It reaches the maximum limit of the frame printer. Super Large Format building volume is 600*mm*600mm*600mm. It has 2 Z-axis metal levers to reduce a lot of sway and make the printing platform more stable during printing. Compared with the all-metal double nozzle, it brings a super low price. It is a cheap double-nozzle large printer but it runs stably and the printing object has high precision.
0.2mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2
Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm
Tenlog 3D Printer Double Head Extruder & Nozzle Kits with Extrusion Motor Support Rapid Disassembly to Replace Nozzle Kits
Tenlog 3D Printer Double Head EXtruder & Nozzle Kits, also called Tenlog Quick Disassembly Replacement Nozzle Kits. Each kits requires only 4 screws to replace the entire nozzle and extruder kits.
Tenlog 3D Printer Photoelectric Sensors Positioning Accuracy up to 0.025mm
All Tenlog Double Extrusion 3D Printers use high precision 3D printer sensors, the Photoelectric Sensors.
Tenlog Dual Extruder 3D Printer Mechanical Micro Switch(Limit Switch)
This is Y-axis Stoper, Y-axis just go to zero at the begin of the printing.
Tenlog 3D Printer Ball Slide for Dual Extruder 3D Printer
The ball slides slide smoothly and have a long service life and easy maintenance. Only regular grease or lubricant is required.
0.2mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1
Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm
Tenlog 3D Printer Nozzles 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm
Here you can find 3D printer nozzles of all types and sizes. When you place an order, buy more nozzles, no longer worry about nozzle clogging, no need to spend time cleaning the nozzle.
Tenlog 3D Printer Hot Bed 24V MAX Temperature 80℃
Its working voltage is 24V and the maximum temperature is 80 degrees.
Tenlog Dual Extruder 3D Printer Cooling Fan Used for Cool Printed Object Dissipate Heat and Motherboard
The normal fan on the left is used to cool the heat sink in the nozzle kit. The turbofan on the right provides more airflow for cooling printed objects and reducing the cooling time of the filaments.
MW Power for Tenlog Dual Extruder 3D Printer Peak Power 350W
Input Voltage Range 110-120V ~/6.8A 200-240V ~/3.4A 50/60Hz Output 24V ⎓ 14.6A
Assembly and Maintenance Tools for Tenlog Dual Extruder 3D Printer
There are 2 toolboxes in each package for you to install and maintain the Tenlog 3D Printer.
0.4mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1
Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.4mm
0.4mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2
Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.4mm
0.5mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1
Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.5mm