electric tester-sfyh.com

Covering Scratch Test Machine

ZLT-GC1, to determine the adherence and the durability of protective coverings on printed circuit board and of insulating layers on accessible hazardous parts or metal parts，according to IEC60950 figure 2K and clause 2.10.8.4,IEC60335-1 clause 21.2

Inclined Plane Test Device

ZLT-WD1. Table Diameter :600mm ,to determine the stability of electric appliances ,in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1

Flexible Pipe Winding Test Device

ZLT-SDW1. To determine the mechanical strength of sealed lighting chains, in accordance with the IEC60598-2-20 Fig 3 and clause 20.6.14.

Lampholder Contacts Security Test Device

ZLT-DTC. To check the security of lampholder contacts, and conform to the IEC60598-2-20 Fig 2 and clause 20.11.3.

Toaster Switch Endurance Test Machine

ZLT-DSK. To determine on off life of switch of the toasters, in accordance with the IEC60335-2-9 clause 19.101.

Cordless Kettle Insert Pull Tester

ZLT-SW1. To use for the insert-pull test of cordless kettle and foundation, in accordance with IEC60335-2-15 clause 22.103

Screwed Glands Test Device

ZLT-LWM1. To determine the torque strength of the screwed glands，in accordance with the IEC60598-1 clause 4.12.5.

Automatic Cord Reels Endurance Tester

ZLT-JX1. To determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.

Microwave Oven Door Endurance Tester

ZLT-WM1. To determine the endurance of the door system, including the hinges, microwave seals and other associated parts, shall be constructed to withstand wear that may be expected in normal use, according to the IEC60335-2-25 clause 18.

Electric Iron Drop Tester

ZLT-IF1. To determine the mechanical strength of electric irons by repeated drop onto a steel plate according to IEC60335-2-3 clause 21.101.

Load for Testing Rotating Spits

ZLT-LR. This load confirms to the IEC60335-2-9 figure 102, mass approximately 4.5kg.

Test Vessel

ZLT-VL6. This Test Vessel confirms to the IEC 60335-2-6 clause 21.102,

Test Corner

ZLT-BDK. To measure the temperatures, according to IEC 60335-1 clause 11.2 and 11.3, EN61010 clause 9.2,VDE 0551 Part 1,VDE 0700 Part 1.

Copper Disks

Made of copper or brass,15 mm in diameter and 1 mm thick,accordance with IEC 60335-1 clause 11.3.

Appliance Stability Test Equipment

ZLT-WD3. Table diameter: 1000mm, to determine the stability of electric appliances ,in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1

Appliance Stability Tester

ZLT-WD2. Table diameter: 800mm ,to determine the stability of electric appliances ,in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1