All Types Of Electronics

Extension Base Back Panel RF620 3BHT100011R1 ABB

Manufacturer : ABB Status : New In Stock

HDRiG DJI Ronin 25mm Single Rod Clamp Monitor mount

The camera monitor holder with 25mm DJI Ronin rod clamp .

GE DS200UCVAG1A

GE DS200UCVAG1A NEW AND ORIGINAL PACKAGE

SMD Toroidal Inductor Case PA66 Material Case

Toroidal SMD inductor Case, No Pin, UL REC:94V-0 Size=30.61mmX27.9mmX11.43mm, PA66 and FR530 Material Case

ABB ED 1803b HESG330086R1 with factory sealed box

ABB ED 1803b HESG330086R1 with factory sealed box 100% Brand New. 365 days warranty.

Finisar FTLX1672M3BTL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672M3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDM STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BTL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

IWSCR012 power window switch For Jeep Liberty 2002-2007 56010677AA

380-440V Power Factor Controller RVC6-5A ABB

Manufacturer : ABB Status : New In Stock

fakra SMB female

HDRiG Single Rod Clamp For DJI Ronin-M Gimbal Stabilizer

The 25mm rod clamp monitor mount bracket for DJI Ronin M and freefly MOVI.

GE 193X802DAG01

GE 193X802DAG01 NEW AND ORIGINAL PACKAGE

Common Mode Choke Coils Case SMD Inductor Case

Common mode choke SMD case, No Pin, UL REC:94V-0 Size=18.4mmX16.8mmX8.9mm, we can make case tooling. PA66 and FR530 Material SMD Inductor Case

ABB ED1715 HEDT300371R1 new with one year warranty

ABB ED1715 HEDT300371R1 new with one year warranty 100% Brand New. 365 days warranty.

Finisar FTLX1772M3BCL 10G 40km 1310nm SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with SFF-8431 and SFF-8432, and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x Fibre Channel and 6.144G/9.83 CPRI. These transceivers have higher optical transmit power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1 transceivers. They support an optical link budget of 17dB to compensate for the higher fiber attenuation loss at 1310nm over 40km of G.652 single mode fiber.

IWSCR009 window switch For Chrysler Dodge Ram 1500 Regular Cab 2002-2008 56049804AC

Freelance Power Supply 115/230VAC SA801F ABB

Manufacturer : ABB Status : New In Stock

CRC9

GE 193X277ACG02

GE 193X277ACG02 NEW AND ORIGINAL PACKAGE

HDRiG DJI 25mm Rod Clamp With Quick Release V-Lock Battery Plate

It is the QR battery mount with 25mm rod clamp for DJI DJI Ronin-M, Freefly MOVI.

ABB TV989-2770-28 with factory sealed box

ABB TV989-2770-28 with factory sealed box 100% Brand New. 365 days warranty.

Finisar FTLX1871D3BxL 10G-ZR 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX1871D3BxL optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Finisar’s FTLX1871D3BNL transceivers are RoHS compliant as per Directive 2011/65/EU and Finisar Application Note AN-2038.

RM10 Electronic Transformer Case Phenolic Transformer Case

RM10 Transformer Case, Phenolic Material Size=29.8mmX20.6mmX15.0mm,UL REC:94V-0

EFD30 Transformer Case for High Frequency Transformers

EFD30 Electronic Transformer Case. No pin. Case Size=44mmX33mmX2.6mm. We can make case tooling. Phenolic material transformer case. UL REC:94V-0

IWSCR010 car power window switch For Dodge Durango 1998-2000 56021658

Control PCB Circuit Board SAFT103 ABB

Manufacturer : ABB Status : New In Stock

HDRiG Thread Adapter Female/Male 1/4 Inch to 3/8 Inch

This is a thread adapter set included 3/8"-16 female to 1/4"-20 male and 1/4"-20 female to 3/8"-16 male.

BNC male right angle

GE 44A297005G02

GE 44A297005G02 NEW AND ORIGINAL PACKAGE

ABB DSSR122M Warranty One Year

ABB DSSR122M Warranty One Year 100% Brand New. 365 days warranty.

Finisar FTLX1871M3BxL 10G-ZR/OC-192 LR-2 Multirate 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1871M3BxL are Enhanced Small Form Factor Pluggable SFP+ optical transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and G.959.1 P1L1-2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel. Finisar's FTLX1871M3BCL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant

High Frequency Transformer ER35 Bobbin Case

ER35 high voltage transformer. Black transformer case for ER35 bobbin. Case Size=43.6mmX36.2mmX29.3mm. We can make case tooling. PET material transformer case. UL REC:94V-0

IWSCR008 car window switch For Chrysler Dodge Durango 2001 2002 2003 206885-201

Power Supply SAFT110 ABB

Manufacturer : ABB Status : New In Stock

BNC waterproof female

HDRiG M5 Rotating Knob Adjustable Thumb Lever Screw (15mm long)

M5x15mm long rotating knob thumb lever screw for 15mm rod support clamp DSLR camera rig system.

GE 44A294518G01

GE 44A294518G01 NEW AND ORIGINAL PACKAGE

ABB DT601A-E GJR2911100R0001 Orignal Products

ABB DT601A-E GJR2911100R0001 Orignal Products 100% Brand New. 365 days warranty.

Finisar FTLX2672D3xx 10Gb/s Bidirectional 30km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2672D327/FTLX2672D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 30km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX2672D327/FTLX2672D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per Directive 2011/65/EU.

IWSCR014 Car window switch For Jeep Wrangler 2007-2010 04602675aa

All products