Products Overview:
We are professional LED TV CKD/SKD overall solution provider and OEM/ODM manufacturer with 15 years' experience, which has excellent solution design ability, specialized R&D team, best pre-sales and after-sales service. LED TV size from 18.5" to 75" CKD/SKD both can be customized. Our Aim is to provide you the quickest and most thorough pre-market after-sales service and the best overall solutions.
We can provide LED TV whole CKD/SKD solutions, including plastic/plastic+metal TV Cabinet(front bezel, middle bezel, support shore, back cover, IR lens, bracket base, base rubber, backplane, side terminal plate, bottom terminal plate), Optics(LED bar/reflector/diffuser plate/diffuser film/prism sheet), Mainboard/motherboard, Electronics accessories(key board, IR board, wire for LED bar, speaker and speaker wire, remote, power wire, keyboard wire, LVDS wire), Ingredients(EVA gasket/glass limit/cushion rubbers/acetate tape/double sided foam for OC) and all screws(BB3*8/PWB3*8/BM3*6/BM3*4...).
Main Solutions:
31.5inch Backlight Solution 1
(Brightness: 4433cd/m²)
|
LED Bar (2*6) 2W
|
|
Diffuser Plate*1
|
|
Diffuser Film*1
|
|
Reflector Film*1
|
|
Prism Film 0 degree*1
|
31.5inch Backlight Solution 2
(Brightness: 3876cd/m²)
|
LED Bar (2*6) 2W
|
|
Diffuser Plate*1
|
|
Diffuser Film*1
|
|
Reflector Film*1
|
|
Cabinet
|
Plastic + Metal (high quality appearance)
|
|
Electronic materials
|
Mainboard+Key board+IR board+LED Bar with wire+Speaker with wire+Remote+Power Wire+Keyboard Wire+LVDS
|
|
Ingredients
|
EVA Gasket for Middle Bezel+Cushion Rubber+Acetate tape+Screws
|
|
Remark: CKD/SKD Customized can be accepted based on your actual requirement.
|
CKD Parts Introduction - Diffuser Plate
Diffuser Plate did a lot of interference, the biggest characteristic is light no matter how much is the original design of the light distribution curve, as long as the light by the diffuser plate it can make the beam Angle to 160 ~ 176 °, so from the side, the feeling of the surface has a layer of fog fog of lamps and lanterns, from this point can prove that the beam Angle is big to 160 ~ 176 ° best proved that the lower beam Angle, the greater the intensity of illumination, some will also produce filter, make some wavelengths cannot penetrate, cause color, as in the surface of optical interference again processing (such as grinding, sand and grain), light transmittance due to the natural phenomenon of geometrical optics is low, So the substrate used to make the diffusion plate should be as low as possible, the lower the interference with light.
According to the principle of optics, there are only two types of diffusion plates. One is to increase the Angle of the beam, and the other is to maintain the original Angle
According to material classification, glass, polystyrene (PS), polycarbonate (PC), polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), acrylic (PMMA), acrylic acid (MMA)... And so on transmittance polymerization materials or synthetic materials can be made into different USES of diffusion materials.
The types of diffusion plate can be divided into gas diffusion plate, acoustic diffusion plate, liquid diffusion plate, light diffusion plate, taste diffusion plate, light diffusion plate, all the molecules can be evenly dispersed materials are called diffusion plate.
Gas diffusion plate -> is generally used to reduce the sound generated by airflow, such as the muffler of a car.
Sound diffusion board -> is generally used to eliminate sound echo caused by hard objects, such as the wall or ceiling of a concert hall.
Diffusion plates -> are used to turn liquids into fogs or smaller molecules to distribute them evenly, such as greenhouse water curtains.
Odor diffusion plate -> is generally used to eliminate or disperse odor to reduce it, such as gas mask filter tank or water filter filter tank.
Light diffuser -> is generally used to prevent glare and to provide a comfortable visual environment, such as a diffuser in front of a camera flash.
Diffusion plates are used in LED TV backlight
Applied to the straight down backlight system used in LCD TV, the diffusion plate has good properties such as heat resistance, dimensional stability, mechanical strength, fire resistance, and high light transmittance, excellent shielding and durability, making its light diffusion effect reach the best state, most suitable for straight down backlight unit
Product features
Diffusivity of light source: suitable for straight down backlight module, with high brightness and high diffusivity, it can improve the diffusivity effect of backlight evenly distributed.
Light transmittance: excellent light transmittance results in high brightness.
Dimensional stability: minimum water absorption, good dimensional stability can be maintained in humid environment, and can be used normally in the temperature range of -40℃~125℃.
Antistatic: it has good surface antistatic property to prevent dust adsorption.
Products Images:
FAQ
Q: How long is the warranty?
A: 1-year warranty since delivered out.
Q:How about the OEM/ODM service ?
A: We provide all kinds of OEM/ODM service,eg:Logo printing on housing,Customized package,Software Customization.
Q: How long is the delivery time?
A: Sample order about 3-5 working days, bulk order about 7-15 working days.
Normally, we ship goods by sea,air and express.
. By sea to your nearest sea port for 10~15 days
. By air to your nearest air port for 5~10 days
. By express(UPS,DHL.FEDEX,TNT...) to your door for 3~6 days
Q: What methods of payment accepted?
A: 1. We can accept T/T, L/C before production.
2. If you have any doubt about payment, please contact us freely.
Q: Why do you choose us?
A: Shenzhen INDASINA Technology Co.,ltd is a high quality DLED TV manufacturer and solution provider. We will try our best to provide the products you need, we will provide you with the most satisfactory service. If you want to know more, you can contact us. We also welcome you to visit our factory in Shenzhen.
