Topstar Technology Industrial Co., Ltd.-sfyh.com

Finisal FTLF8528P3BCV 8G Fibre Channel (8GFC) 150m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8528P3BxV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8528P3BNV 8G Fibre Channel (8GFC) 150m Extended Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8528P3BNV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisal FTLF1428P3BNV 8G Fibre Channel (8GFC) 10km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1428P3BNV SFP+ optical transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate and up to 10 km link length. They are compliant with FCPI-4 Rev. 7.00 and SFF-8472 Rev 10.1, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 1.3. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX8574D3BCL 10GBASE-SR/SW 400m Multimode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisal FTLX8574D3BCV 10G/1G Dual Rate (10GBASE-SR and 1000BASE-SX) 400m Multimode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX8574D3BNL 10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BNL Extended Temperature 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX8573D3BTL 10GBASE-SR 400m Industrial Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX8573D3BTL Industrial Temperature 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8573D3BTL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1371D3BCL 10GBASE-LRM 220m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1371D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1371D3BCL is a "linear module" i.e. it employs a linear receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module. The transceiver is RoHS compliant and lead-free per Directive 2011/65/EU,

Finisar FTLX1370W4BTL 10G CPRI Wireless 1.4km Industrial Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1370W4BTL SFP+ transceivers are designed for use in Wireless basestation links up to 1.4 km at up to 9.8304 Gb/s data rates for CPRI, OBSAI, LTE, or other Wireless applications. They are compliant with SFF-8431, SFF-8432, SFF-8472 Rev 10.2, CPRI Rev 5.0 and OBSAI Rev V4.2. The transceiver is RoHS-6 compliant per Directive 2011/65/EU.

Finisar FTLX1475D3BCL 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BCL employs a limiting receiver. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1475D3BNV 10G/1G Dual Rate (10GBASE-LR/LW and 1000BASE-LX) 10km 1310nm Extended Temp Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BNV 10G Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BNV employs a limiting receiver. The transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX1475D3BCV 10G/1G Dual Rate (10GBASE-LR/LW and 1000BASE-LX) 10km 1310nm Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BCV 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over Single Mode Fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BCV employs a limiting receiver. The transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1475D3BTL 10G 10km 1310nm Industrial Temperature Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L, and can support CPRI options 7 (9.83Gb/s) and 8 (10.137Gb/s) over 10km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BTL uses a limiting electrical interface receiver.

Finisar FTLX1472M3BxL 10GBASE-LR/OC-192 SR-1 Multirate 10km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1472M3BxL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to 10km over G.652 single mode fiber. These transceivers are equipped with internal transmitter and receiver retimers (Clocks and Data Recover or CDR) to comply to SONET/SDH jitter requirements and to enhance host cards high speed data-signal integrity. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Thes optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BCL 10GBASE-ER 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BCL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER, and support 10G Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BNL 10GBASE-ER/EW 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BNL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x, and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BTL 10GBASE-ER 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX3971DTCxx 1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3971DTCxx optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1G-10G Ethernet, 2x-10x Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3671DTCxx 1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3671DTCxx optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 2x-10x Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3971MTCxx 10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3971MTCxx optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 1-10G Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Finisar FTLX3971MTCxx transceivers use internal re-timers (clock and data recovery or CDR) for the transmitter and the receiver to guarantees compliance with the SONET/SDH jitter requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3671MTCxx 10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3671MTCxx optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 1-10G Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432.

Finisar FTLX1672M3BCL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Product Description: Distance:40 km Data Rate (max):11.3 Gb/s Protocol:8x Fibre Channel Compliant SONET OC-192 Compliant 10x Fibre Channel Compliant 10 Gigabit Ethernet Compliant Wireless CPRI Compliant Low End Case Temperature (°C):-5 High End Case Temperature (°C):70 Diagnostics:Digital Transmitter:EML Receiver:PIN Voltage Supply:3.3 Connector:LC Wavelength:1550nm Product Feature: Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s 40km link length (800ps/nm) Internal transmitter/receiver CDR Low power consumption Cooled 1550nm EML laser Limiting electrical interface receiver Duplex LC connector Built-in digital diagnostic functions RoHS-6 compliant (lead-free) Case temperature range: -5°C to 70°C Products series: Topstar are one of the leading Manufacturers and Supplier of Fiber Optical transceivers in Shenzhen. Our main core business as below: Original SFP module:We are a professional supplier of original (Finisar/ Cisco/ Brocade/ Huawei/ Avago/ Source/ WTD/ JDSU/ INTEL, etc) sfp module, more than 200,000pcs inventory per month in warehouse satisfy your one-stand demand.

Finisar FTLX1672M3BNL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672M3BNL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDH STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BNL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

Finisar FTLX1672M3BTL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672M3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDM STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BTL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.

Finisar FTLX1772M3BCL 10G 40km 1310nm SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with SFF-8431 and SFF-8432, and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x Fibre Channel and 6.144G/9.83 CPRI. These transceivers have higher optical transmit power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1 transceivers. They support an optical link budget of 17dB to compensate for the higher fiber attenuation loss at 1310nm over 40km of G.652 single mode fiber.

Finisar FTLX1871D3BxL 10G-ZR 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX1871D3BxL optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Finisar’s FTLX1871D3BNL transceivers are RoHS compliant as per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FTLX1871M3BxL 10G-ZR/OC-192 LR-2 Multirate 80km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1871M3BxL are Enhanced Small Form Factor Pluggable SFP+ optical transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and G.959.1 P1L1-2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel. Finisar's FTLX1871M3BCL transceivers use internal clock and data recovery (CDR) IC's for the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant

Finisar FTLX2672D3xx 10Gb/s Bidirectional 30km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2672D327/FTLX2672D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 30km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX2672D327/FTLX2672D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per Directive 2011/65/EU.

Finisar FTLX2072D3xx 10Gb/s Bidirectional 10km Gen2 SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2072D327/FTLX2072D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX2072D327/FTLX2072D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per Directive 2011/65/EU.

Finisar FTLB8611P3xC 10Gb/s Bidirectional Dual-Band DWDM 20km Multi-Rate Tunable SFP+ (Bidi T-SFP+) Optical Transceiver

Form Factor: SFP+ Finisar’s FTLB8611P3CC / FTLB8611P3NC transceivers are Enhanced Small Form Factor Pluggable Tunable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 20km of G.652 single mode fiber. These transceivers are based on Finisar’s novel bidirectional dual-band DWDM architecture that fits one pair of downstream and upstream channels into a 100GHz band.

Finisar FTLX2471DC0xx 10GBASE-LR 10km CWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX2471DC0xx 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in CWDM 10km Single Mode fiber links. They are compliant with SFF-8431, SFF-8432 and compatible with IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.

Finisar FTLF8526W4BTL 6G CPRI Wireless 300m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8526W4BTL SFP+ transceivers are designed for use in wireless application of links up to 6.1 Gb/s data rate over multimode fiber. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF1426P2BTL 6G CPRI Wireless 15km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1426P2BTL SFP+ transceivers are designed for use in Wireless basestation links up to 15 km at 4.915 and 6.144 Gb/s data rates for CPRI, OBSAI, LTE, or other Wireless applications. They are compliant with SFF-8472 Rev 10.2, CPRI Rev 4.1, OBSAI Rev V4.1, and compatible with SFF-8432, 1.228 and 2.457 Gb/s data rates for CPRI, and applicable portions of FC-PI-4 Rev 8.00 and SFF-8431 Rev 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FCLF852xP2BTL 1000BASE-T 100m Gen2 RJ-45 Copper SFP Optical Transceiver

Form Factor: SFP Finisar's FCLF8520P2BTL, FCLF8521P2BTL and FCLF8522P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. They are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

Finisar FTLF8519P3BNL 1000BASE-SX and 2G Fibre Channel (2GFC) 500m Extended Temperature SFP Optical Transceiver

Form Factor: SFP Finisar's FTLF8519P3BNL Small Form Factor Pluggable (SFP) optical transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 5.0. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. The transceiver is RoHS-6 compliant per Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

100g qsfp28

40gb qsfp+

100g cfp cfp2 cfp4

40g cfp

sfp+ modules

bidi 10g sfp+

xfp bidi

10g xfp

bidi sfp

100mb~2.5gb sfp module

4.25gb sfp

dwdm transceiver

10gb modules

100mb~8gb sfp

40gb 100gb transceiver

Company profile

All products