finisar transceivers-sfyh.com

Hot-pluggable Type 2 400GBASE-LR8 QSFP-DD Optical Transceiver

Product Description: Distance:10 km Data Rate (max):425 Gb/s Protocol:400G Ethernet Compliant Low End Case Temperature (°C):0 High End Case Temperature (°C):70 Diagnostics:Digital Transmitter:8x LWDM DFB Laser Receiver:PIN Voltage Supply:3.3 Connector:LC Wavelength:1310nm Band Product Feature: Hot-pluggable QSFP-DD Type 2 form factor Supports 425Gb/s aggregate bit rate Power dissipation <13W RoHS-6 compliant Commercial case temperature range of 0°C to 70°C Single 3.3V power supply Maximum link length of 10km on Single Mode Fiber (SMF) Aligned with IEEE 802.bs 8x50G PAM4 DFB-based LAN-WDM transmitter 8x50G PAM4 retimed 400GAUI-8 electrical interface Duplex LC receptacles I2C management interface

Hot-pluggable FTCD1333E1PCL 0°C to 70°C 400GBASE-FR8 QSFP-DD Optical Transceiver

Product Description； Distance:2 km Data Rate (max):425 Gb/s Protocol:400G Ethernet Compliant Low End Case Temperature (°C):0 High End Case Temperature (°C):70 Diagnostics:Digital Transmitter:8x LWDM DFB Laser Receiver:PIN Voltage Supply:3.3 Connector:LC Wavelength:1310nm Band Product Feature： Hot-pluggable QSFP-DD Type 2 form factor Supports 425Gb/s aggregate bit rate Power dissipation <13W RoHS-6 compliant Commercial case temperature range of 0°C to 70°C Single 3.3V power supply Maximum link length of 2km on Single Mode Fiber (SMF) Aligned with IEEE 802.bs 8x50G PAM4 DFB-based LAN-WDM transmitter 8x50G PAM4 retimed 400GAUI-8 electrical interface Duplex LC receptacles I2C management interface

Hot pluggable FTLC3322x3NL 200G/100G Tunable C-Band CFP2-ACO Analog Coherent Optical Transceiver

No brief introduction

Hot pluggable FTLC3341x3NL 200G/100G LC CFP4-ACO Analog Coherent Optical Transceiver

No brief introduction

Hot-pluggable FTCD1314E1BCL 400GBASE-LR8 10km CFP8 Optical Transceiver

No brief introduction

Hot-pluggable FTCD1324E1BCL 400GBASE-FR8 2km CFP8 Optical Transceiver

No brief introduction

Finisar FTL410QD4C 40GBASE-SR4/10GBASE-SR 300m Gen4 QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QD4C QSFP+ optical transceiver modules are designed for use in 40 Gigabit per second links over parallel multimode fiber, including breakout to four 10 Gigabit per second links. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and compatible with IEEE 802.3ba 10GBASE-SR. Digital diagnostics functions are available via an I2C interface, including Tx and Rx powering monitoring. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTL410QE3C 40GBASE-SR4 150m Gen3 QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QE3C QSFP+ optical transceivers are designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and breakout to 4 10GBASE-SR. The Gen 3 variant has built-in real-time digital diagnostic functions, including Tx and Rx power monitoring. The optical transceiver is compliant per the RoHS-6 Directive 2011/65/EU.

Finisar FTL410QD3C 40GBASE-SR4/10GBASE-SR 300m Gen3 QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QD3C QSFP+ optical transceiver modules are designed for use in 40 Gigabit per second links over parallel multimode fiber, including breakout to four 10 Gigabit per second links. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and compatible with IEEE 802.3ba 10GBASE-SR. The Gen 3 variant has built-in real-time digital diagnostic functions, including Tx and Rx powering monitoring. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTL410QE2C 40GBASE-SR4 150m Gen2 QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QE2C QSFP+ optical transceivers are designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS-6 Directive 2011/65/EU.

Finisar FTL410QD2C 40GBASE-SR4/4x10GBASE-SR 300m Gen2 QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QD2C QSFP+ transceiver modules are designed for use in 40 Gigabit per second links over parallel multimode fiber, including breakout to four 10 Gigabit per second links. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and compatible with IEEE 802.3ba 10GBASE-SR. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTL410QE2N 40GBASE-SR4 100m Extended Temperature QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL410QE2N QSFP+ transceiver modules are designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4. Module-level digital diagnostic functions are available via I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTL414QB2C 56G InfiniBand FDR/SAS 3.0/40G Ethernet 60m QSFP+ Optical Transceiver

Form Factor: QSFP+ Finisar's FTL414QB2C QSFP+ transceiver modules are designed for use in Ethernet, SAS, and Infiniband links over multimode fiber. They are compliant with the QSFP+ MSA and the Ethernet, SAS and Infiniband architecture specifications. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLD10CE3C 12x11.3G (120G) 100m Gen3 CXP Optical Transceiver

Form Factor: CXP Finisar's FTLD10CE3C third-generation CXP optical transceiver modules are designed for use in data center, core-routing, and high-performance computing applications up to 120 Gigabit per second links over multimode fiber. They are compliant with the InfiniBand Trade Association (IBTA) CXP Specification, IEEE 802.ba 100GBASE-SR10 and CPPI interfaces supporting 12 parallel, bi-directional data channels at rates from 1G/bs to 11.3Gb/s per channel. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLD12CE3C 12x12.5G (150G) 100m Gen3 CXP Optical Transceiver

Form Factor: CXP Finisar's FTLD12CE3C third-generation CXP optical transceiver modules are designed for use in data center, core-routing, and high-performance computing applications up to 150 Gigabit per second links over multimode fiber. They are compliant with the InfiniBand Trade Association (IBTA) CXP Specification, IEEE 802.ba 100GBASE-SR10 and CPPI interfaces supporting 12 parallel, bi-directional data channels at rates from 1G/bs to 12.5Gb/s per channel. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4BCV 25GE SR/10GE SR Lite/eCPRI Short Wavelength SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8536P4BCV SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF3436W4BTxx 25GE LR/eCPRI CWDM SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF3436W4BTxx SFP+ optical transceivers are designed for use in Ethernet/eCPRI/CPRI links up to 25.78 Gb/s data rate and up to 10km link length. They are compliant to SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4PCL 25GE SR Short Wavelength SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8536P4PCL SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4PCV 25GE SR/10GE SR Lite eCPRI Short Wavelength SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8536P4PCV SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4BNL 25GE SR LC 850nm 100m SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8536P4BNL SFP28 optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.