flexible cord-sfyh.com

Internal Wire Flexibility Tester

ZLT-WM1A, in accordance with IEC60335-1 clause 23.3, For continuous bending tests by swivelling movements to check internal wire in normal use or maintenance

Flexible Cables Flexing Tester ZLT-QL1

ZLT-QL1. This Tester is checking mechanical strength of completed flexible cables,according to IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.

Swivel Test Machine

ZLT-JDW1. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.

ZLT-JDW3R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 -1. 3 Working Station for 3 specimens simultaneously.

Abrasion Resistance Testing Machine

ZLT-DYJ2. To determine the durability of cable coverings, flexible insulating tubing, coats of lacquer, inscriptions, designations and the like at room temperature by scraping to and fro, according to UL1581 test 1690, EN 60730

Tinsel Cord Bending Test Apparatus

ZLT-JDW2R. To determine the bendability of the tinsel cord,in accordance with IEC 60227-2 clause 3.2 ,figure 2 and IEC 60227-1 clause 5.6.3.2.

Power Cord Strain and Twist Tester

ZLT-LN1. To determine the strain and twisting of the supply cord where it enters the appliance, in accordance with IEC60335-1 clause 25.15.

Cold Bend Test Apparatus

ZLT-SDJ1. To determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60811-1-4 clause 8.1 figure 1

Thermal Deformation Test Device

ZLT-JR1. To determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.

Tinsel Cord Snatch Test Device

ZLT-ST2, to determine the impactive effect of the tinsel cord,in accordance with IEC 60227-2 clause 3.3 and IEC 60227-1 clause 5.6.3.4.

Three Pulley And Two Pulley Cable Flexing Testing Machine

ZLT-QL1A. adding three pulley flexing test, have a modified carrier C, For checking the mechanical durability of flexible cords and cables by bending them back and forth, according to IEC60245-2/1998-04 figure 1, IEC 60245-2 figure 6 and clause 3.5 table 3. IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11

Flexible Cord Abrupt Pull Test Apparatus

Conform to UL 817 clause 99 and figure 99.1 -99.2, for abrupt pull test, rotation test,drop weight test and carrying current test of grouding conductor :0.1-50A