Special Offers
Products
Low Temperature ROSS Flexing Tester H017B
Flexing tests are sometimes required to be carried out at low temperatures below 0°C. This low temperature version of the Ross flex test is built into a low temperature cabinet. It is used for the flex testing of sole unit samples(including rubber products, shoe soles, PVC, PU, TPR foam and other materials) to assess the effect of flexing under low temperature conditions. After repeatedly flexing and bending, check its degree of damage, crack and deterioration. It has 12 stations for small samples but can also accommodate larger samples by adjusting the mechanism.
EN Sole Flexing Tester H018
This device is designed to do repeated flexing test for shoe soles.
Heel Impact Tester H025
To determine resistance of sole to impact load. When test, each time increase impact energy until heal break / rupture and read impact index.
Heel Fatigue Tester H026
To test resistance to repeated impact property for medium and high heels of female’s shoes at wearing state.
Safety Shoes Impact Tester H028
To test resistance of steel head of safety shoes to impact and inspect its sinking degree to determine shoes safety quality.
Shoe Material Heat Resistance Tester H032
To determine the heat resistance property for sole materials(upper, lining and soling materials) during shoes manufacturing process including crimping, embossing, toe and seat flagging, hot blasting etc.
Outsole Belt Flexing Tester H034
To determine resistance to flex property for shoes outsole. Simulating walking state with wearing shoes to do test, so as to measure sample shoes outsole the property of resistance to bend. Testing times can be set freely, machine stop to work automatically when test times reached. Available to test multiple samples simultaneously to improve working efficiency.
Elastic Tape Fatigue Testing Machine H039
To determine repeated extensibility of elastic tape, cloth and other elastic materials under the maximum stretch. As well as fatigue property for any extensible materials.
Sample Buffing Machine H045
To grind the surface of test materials and get the specified thickness for testing. Operate by wrench and adjust the position at up and down, left and right, back and forth.
IULTCS Leather Abrasion Tester H046
IULTCS & Veslic Leather Abrasion Tester is designed to do rub fastness test on the surface of leather, plastic and textile materials. So as to determine the amount of marring of leather surface or finish and the amount of color transfer to the wool felt. Dry and wet abrasion tests are available.
Shoelace Rubbing Tester H047
UTS H047 Shoelace abrasion tester is to determine abrasion resistance property for various shoelace which is knitted from cotton, flax and chemical fiber materials.
Vamp Material Flexing Tester H049A
To determine flexing resistance or physical damage for all of vamp soft materials including leather, clothing and upholstery coverings. It also can be used to test seam construction during flexing.
Martindale Abrasion Tester H056A
To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.
Bally Leather Flexing Tester H053A
To determine resistance to flex property for leather, fabric, etc. Assess the flexing resistance of leather by damage condition of samples after flexing for a certain of times.
Martindale Abrasion Tester H056B
To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.
Circular Blade Cut Resistance Tester H061
To determine blade cut resistance property for the protective area of safety gloves in accordance with EN 388 (Clause 6.2), excluding the gloves made by very hard materials.
Leather Cracking Testing Machine H062A
UTS H062A Leather cracking testing machine is designed to test the cracking resistance index for uppers, various thin leather and surface of leather.
GB Shoe Peeling Strength Tester H066A
UTS H066A GB Shoe Peeling Strength Tester is suitable for the test method of peel strength between shoe sole and upper.
Density Balance & Densimeter H076
To test the density for Solid, liquid, powder and water absorbent material etc.
Thickness Gauge H079
This thickness is used to measure the thickness for leather, Synthetic and rubber. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. UTS uses a deadweight system removing the uncertainty of other mechanical devices.