Special Offers
Products
Thickness Gauge H079
This thickness is used to measure the thickness for leather, Synthetic and rubber. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. UTS uses a deadweight system removing the uncertainty of other mechanical devices.
Universal Testing Machine(Dual Column) H001
Tensile testing is used in many industries for research, quality and process control. It is designed to determine tensile, compression, bending, shearing force, bonding force, peeling, tearing test, etc, for leather, rubber, plastic, textile, metal, nylon thread, paper and materials of footwear, packaging, aviation, petrochemical, construction, electrical, vehicle, etc. The English software supplied runs on customers’ computer systems, the program provides a particular strength to the machine operation, allowing pre-load of a wide range of test methods and available for exporting, storage and analysis of results. Ready-to-load software together with specific test grips can be provided for various tests.
Brittleness Temperature Tester HP01
Brittleness Temperature Tester is to determine the brittleness characteristic during low temperature testing for wire jacket and vulcanized rubber. Sample is impacted by impact head at a linear speed of 2±0.2m/s after sample fixed onto the test device is soaked into a medium at low temperature for 5 minutes. And then check whether the sample appears cracks, crevices, small holes and fragments at the lowest temperature.
Melt Flow Index Tester HP03
Plastic melt flow index tester is used for determination of melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and science and research institute.
Micro-Computer Tensile Test Machine H004
This tensile tester has wide function with different clamps equipped to test tensile strength, elongation, tear, adhesion, tensile stress, stripping, shear force, bonding force between rubber and metal, etc. Applicable for shoe sole, tire, rubber tube, triangle tape, plastic sheeting, plastic sheet, packaging film, acrylic, FRP,ABS, EVA, PV, etc.
Dynamic Footwear Water Resistance Tester H007-4
This device is to determine all types of shoes dynamic water resistance property.
Steel Shanks Fatigue Resistance Tester H041
To determine the fatigue resistance property of steel shanks of various types of shoes under specified conditions.
Leather Softness Tester H055
Designed for coated fabric in the leather industry, textile industry and other flexible fabric softness and test design only. The material under test clamp on the known size of test hole, and then through a small aperture will load imposed on the fabric, on the dial pointer deflection value.
Shoelace Against Eyelets Abrasion Tester H048
To determine the the resistance of all shoelaces and eyelets to abrasion. The shoelace passes through the eyelet at a specified angle, and then shoelace moves up and down repeatedly under a standard load. 6 sets of specimens can be tested once.
Linear Abrasion Tester H067
This tester is suitable for testing the wear resistance property of plastic, auto parts, rubber, leather and textile, electroplating, free disassembly of components, paint, printing products, etc. Not only can be used to evaluate the product wear resistance, also can be used to evaluate the scratch resistance of the product single or multiple scratches and colours of transitivity. Dry abrasion test and wet abrasion test are available.
Maeser Water Penetration Tester H050
This machine is used to measure the ability of the shoe surface material to resist water penetration during flexing.
Compression Rebound Tester H030
This machine is used to test the resilience of rubber products after a certain amount of time and pressure.
Compression and deformation tester H031
The instrument is used in static compression test of rubber.
Vertical Rebound Resilience Tester H090
To determine the impact resilience of solid rubber from measurement of the vertical rebound of a dropped mass. It is not applicable to the testing of cellular rubbers or coated fabrics.
Slip Resistance Tester H043
To test the friction coefficient of finished shoe sole, sole front or heel, so as to determine shoes slip resistance property.
Circular Rubbing Colour Fastness Tester H072
To determine the damage and color transfer of materials such as upper materials, leather, plastics and textiles. 5 test methods such as dry, wet, perspiration, alcohol and organic solution are available.
Bally Water Penetration Tester H051
This machine is used for testing the dynamic waterproof performance of leather materials.
Insole Insock Absorption And Desorption Tester H052
This machine is used for testing the dynamic waterproof performance of leather materials. To determine the water resistance of heavy leathers, including determination of the penetration time, water absorption, area of penetration and water penetration rates as required. It is applicable to all types of heavy leathers.
Water Vapor Absorption Tester H071
The waterproof material was covered on a round leather sample and fixed on the opening of a metal container filled with 50 ml of water, after a certain period of time, by measuring the sample quality changes, evaluate the water vapor absorption properties of the sample.
Shore Durometer H080-LX-A
Applicable for measure the hardness for soft rubber, natural rubber, thermoplastic elastomer, flexible polyacrylic acid and thermosetting plastics, wax, felt and leather, etc.
