footwear test equipment-sfyh.com

Velcro Fatigue Tester H005

This Velcro fatigue tester is designed to do opening and closing test between both layers of various hook & loop fastener(magic tape). With memory function. Available to adjust balance adjustable block and loads to achieve adjusting pressure demands between samples.

Whole Shoes Bending Tester H007-1

This machine is designed to test the bending durability and inspect the breakage degree of shoes or shoe sole, so as to improve the quality.

Shoes Flexing Tester H007-2

To determine flexing resistance for all all kinds of finished shoes. And determines the fatigue durability and service life of shoes by simulating the walking state of a person, via reciprocating flexing movement under constant frequency and angle.

Shoe Bending Waterproofness Tester H008

To determine the dynamic water resistance property and durability of flexing for shoe immersed in water.

Shoe Water Resistance Tester H009

To determine the waterproofness property for finished shoes. Within the specified depth of water, whole shoe will be mechanically brushed by rotary wet brush, so as to measure the water penetration property for finished shoe.

Shoes Stiffness Tester H012

To determine resistance to flex property for finished shoes.

NBS Rubber Abrasion Tester H014

To determine the abrasion resistance property for rubber or other compounds, sole and heel materials which are not less than 2.54mm in thickness. This machine has memory function so that users can set the number of tests by themselves. The current records will be kept not to change even if power failure or stop occurs. It also can be connected to a cleaner for easy cleaning.

DIN Abrasion Tester H015

Din abrasion tester is mainly to test the abrasion-resistance to specimen by specify sand papers, and measure the condition of abrasion, loss of weight, loss of volume, thickness of abrasion etc. to compare the result of standard rubber and obtain result. With abrasion and tearing function, this device is applicable for testing elastic material, rubber, tire, conveyor belt, shoe sole, transmission belt, and shoe sole, soft synthetic leather, etc.

AKRON Abrasion Tester H016

UTS H016 Akron Abrasion Tester combines with balance to use. Designed to test the abrasion resistance property of shoe sole, tire which is made of rubber and elastic materials. Counter adopts electronic automatic type, able to set abrasion revolution, machine stop automatically after reach preset revolution. It is to determine abrasion resistance property via measure the abrasion volume after sample wear grinding wheel.

ROSS Flexing Tester H017A-1

Applicable for flexing resistance test for rubber products, shoe soles, PVC, PU, TPR foam and other materials. After repeatedly flexing and bending, check its degree of damage, crack and deterioration. It has the memory function.

Low Temperature ROSS Flexing Tester H017B

Flexing tests are sometimes required to be carried out at low temperatures below 0°C. This low temperature version of the Ross flex test is built into a low temperature cabinet. It is used for the flex testing of sole unit samples(including rubber products, shoe soles, PVC, PU, TPR foam and other materials) to assess the effect of flexing under low temperature conditions. After repeatedly flexing and bending, check its degree of damage, crack and deterioration. It has 12 stations for small samples but can also accommodate larger samples by adjusting the mechanism.

EN Sole Flexing Tester H018

This device is designed to do repeated flexing test for shoe soles.

Heel Impact Tester H025

To determine resistance of sole to impact load. When test, each time increase impact energy until heal break / rupture and read impact index.

Heel Fatigue Tester H026

To test resistance to repeated impact property for medium and high heels of female’s shoes at wearing state.

Safety Shoes Impact Tester H028

To test resistance of steel head of safety shoes to impact and inspect its sinking degree to determine shoes safety quality.

Shoe Material Heat Resistance Tester H032

To determine the heat resistance property for sole materials(upper, lining and soling materials) during shoes manufacturing process including crimping, embossing, toe and seat flagging, hot blasting etc.

Outsole Belt Flexing Tester H034

To determine resistance to flex property for shoes outsole. Simulating walking state with wearing shoes to do test, so as to measure sample shoes outsole the property of resistance to bend. Testing times can be set freely, machine stop to work automatically when test times reached. Available to test multiple samples simultaneously to improve working efficiency.

Elastic Tape Fatigue Testing Machine H039

To determine repeated extensibility of elastic tape, cloth and other elastic materials under the maximum stretch. As well as fatigue property for any extensible materials.

Sample Buffing Machine H045

To grind the surface of test materials and get the specified thickness for testing. Operate by wrench and adjust the position at up and down, left and right, back and forth.

IULTCS Leather Abrasion Tester H046

IULTCS & Veslic Leather Abrasion Tester is designed to do rub fastness test on the surface of leather, plastic and textile materials. So as to determine the amount of marring of leather surface or finish and the amount of color transfer to the wool felt. Dry and wet abrasion tests are available.