China forklift loader Manufacturers, Top Mechanic Factory

Electric Pallet Stacker Series 1.5 ton CDD15

Small size, light and flexible, simple operation; Adopting permanent magnet motor with excellent performance and low heat generation; Built-in charger, colloidal maintenance-free battery,easy to use and maintenance free; CURTIS control system, control precision, high efficiency and stability;

1.5 ton Electric Pallet Stacker Series CDD15H

Small size, light and flexible, simple operation; Adopting permanent magnet motor with excellent performance and low heat generation; Built-in charger, colloidal maintenance-free battery,easy to use and maintenance free; CURTIS control system, control precision, high efficiency and stability;

1.5T-2.0T Stand-on Full Electric Pallet Stacker CDD16

The AC brushless drive motor is powerful and maintenance-free; CURTIS AC control system, precise control and higher efficiency; High-performance hydraulic lift motor, with high efficiency, low noise and vibration. EPS electric steering system, driving lighter and more flexible; The mast adopts H-shaped channel steel, which has strong stability and good rigidity;

1.0T-2.0T Power Electric Pallet Stacker CDD20

Axle Load(laden):Drive side/Load-bearing side:1115KG/1785KG Overall Length (Pedal retracted/expanded):2210MM/2645MM Overall width: 880MM Turning Radius:1755MM/2200MM Traveling Speed (laden/unladen):5KM/H / 5.5 KM/H

1.0T-1.5T Battery Counterbalance Stacker with Folding Fork CPD15-W

Load capacity/Rated load: 1000KG/1500KG Frame Length (Pedal retracted/expanded without fork): 1655MM/2075 MM Overall width(W1/W2): 880MM/1030MM Turningradius:1560MM/2000MM

Electric Pallet Stacker Series 1.5 ton CDD15HE

Load capacity/Rated load: 1500KG Overall length（L1/L2）: 1950/2415MM Overall width:790MM Travel speed(aden/unladen):5/5.5 KM/H Imported CURTIS controller

Stand On Electric Reach Truck 1.6 ton ~ 2.0 ton Series CQD16

The AC brushless drive motor is maintenance-free and cost-saving; CURTIS AC control system, accurate control, higher efficiency Equipped with electronic steering, improve efficiency. Can be different lifting heights The imported integrated control system, smooth travel control, superior speed regulation performance;

Forklift Booms, Lift Tilt Jibs For Flexible Lifting of Bulky Load F-SFJS10

This 10,000kg Short Fixed Jib is designed for larger forklifts and is the largest capacity jib in our range.

Electric Reach Truck 1.6 ton ~ 2.0 ton Series CQD20

The AC brushless drive motor is maintenance-free and cost-saving; CURTIS AC control system, accurate control, higher efficiency Equipped with electronic steering, improve efficiency. Can be different lifting heights The imported integrated control system, smooth travel control, superior speed regulation performance; The drive system adopts the guide rail damping structure, ensure that the driving wheel is always in contact with the road surface, ground contact,

Electric Reach Truck 1.5 ton ton CQD15B

Green work environment Easy operation High efficiency Low maintenance cost High cost-effective Long handle design

2.0-3.5Ton Series Counterbalance Electric Forklift Truck CPD20E

Load capacity/Rated load: 2000KG Overall length (with out fork): 2210 MM Overall width: 1070 MM Turningradius:2010MM Imported CURTIS controller/SME

2.0Ton-2.5Ton Counterbalance Electric Forklift Truck CPD20M/25M

Load capacity/Rated load:2000KG-2500KG Overall length(with fork):3400MM Overall width:1265MM Travel speed(aden/unladen):14/15 KM/H Imported CURTIS controller

4 wheel 2.0-3.5 ton Series Counterbalance Electric Forklift Truck CPD35

Load capacity/Rated load:3500KG Overall length (Cargo fork):3735MM Overall width:1220MM Travel speed(aden/unladen):14/15 KM/H Imported CURTIS controller

QSD30M站驾式牵引车

Load capacity/Rated load: 350KG Overall length (Cargo fork):1 455MM Overall width:800MM Travel speed(aden/unladen):Referto the climbing curve Imported CURTIS controller

3.0 ton Manual Pallet Truck Hand Pallet Truck CBY30

Small body and light weight High quality Pump With overload automatic unloading device, and full-load descending speed limit device Molded production, moderate price, stable quality; high-strength polyurethane wheels is stable, flexible, light, and free of magnetic fields and sparks;

Galvanized Finished Foldable Brick Cage M-BSN6

Brick Cage is designed to convey pallets of bricks or similar loose products safely to a work location via overhead crane.

Heavy Duty 10T Fixed Jib Attachment Long type for Forklift F-SFJL10

This 10T Jib has a 3.56 metre reach when fully extended and is fitted with wide fork pocket centres.

Forklift Tow Ball Jib Attachment 2000kg F-FST200

The type F-FST200 Forklift Slip-on Hook Jib has been designed as a simple Slip-on Jib attachment with 2 hook positions 585mm apart and a diameter 50 Tow Ball fitted at the front of the Jib.

Forklift Telescoping Jib Boom Crane Tilt Jib F-TJS2.5

Type F-TJS2.5 Tilt Jib allows for additional height, compensating for length of the hook and slings when lifting.

Lifting 2.5T Extendable Forklift Jib F-TJL2.5

Type F-TJL2.5 is extremely versatile, 8 hook positions available, as well as 3 different angle positions.

Forklift Crane Jib Attachment Tilting Jib 4.5T F-TJCL45

One of the most versatile jib attachments in our range and allows for additional height of up to 2.23m.

Forklift Lifting Hoist Swivel Hook Mobile Crane 2000kg Capacity Lift F-FH25

Type F-FH25 Forklift Lifting Hoist Swivel Hook Mobile Crane 2000 kgs Capacity Lift

Crane / Forklift Spreader Bar Lifting Beam 9000kg Capacity F-CFL2439

It is a unique multitasking spreader beam which can be used by Crane or Forklift to lift long loads.

Forklift Carriage Mounted Jib Attachment F-GNJ

Type F-GNJ Carriage Mounted Jib is a heavy duty carriage mounted jib that offers height and manoeuvrability.

Skid Steer 1300kg Capacity Round Hay Bale Grab S-HBG760-2000

Hay Bale Grapple for Skid Steer Loaders and also for Farm Tractors.

Skid Steer Pro Series Grapple Bucket S-GBPS

Skid Steer Grapple Bucket Attachment Professional Series, combines the loading and leveling actions of a skid steer bucket with the "grabbing ability" of two hydraulic grapples.

72″ Heavy Duty Dual Cylinder Root Rake Grapple Attachment Fits Skid Steer

The Skid Steer Rock Grapple Bucket is an extremely versatile attachment.

72" Dual Cylinders Root Grapple Bucket with Skid Steer Universal Quick Hitch S-06050

The Root Grapple Bucket is ideal for picking up and moving small logs, brush, debris, and other odd shaped or hard to lift material.

72" wide Extreme Duty Root Rake Grapple for Skid Steer S-113201

The 72'' Extreme Grapple Rake is ideal for picking up and moving, rocks, logs, brush, debris,and other odd shaped or hard to lift material.

Forklift Steel Pipe Clamp Attachment F-GGJ-A

Widely used in all kinds of water pipe plant, building materials, construction and other industries of water pipe shipment.

Forklift Steel Pipe Clamp Attachment F-GGJ-B

Widely used in all kinds of water pipe plant, building materials, construction and other industries of water pipe shipment.

Forklift Water Pipe Clamp Attachment F-SGJ

Widely used in all kinds of water pipe plant, building materials, construction and other industries of water pipe shipping. The rake is made of high strength steel plate.

Forklift Hydraulic Waste Grab with 2 Cylinder F-FLJ

Suitable for all kinds of scrap iron, scrao, waste paper and other materials shipment.

Hydraulic Waste Grab Attachment with 1 Cylinder F-FLJ

Suitable for all kinds of scrap iron, scrao, waste paper and other materials shipment.

Forklift Attachment Timber Grab F-YMJ

Specially designed for wood shipment, four high strength steel plates are made into rake to ensure that the wood does not fall off during shipment.

Forklift Movable Thumb Kit Attachment F-DBPZJ

Increase the flexibility of forklift, so that the original forklift can not operate the special conditions to easily solve.

Forklift Waste Grab Attachment F-DBFLJ

Flexible manipulator, suitable for all kinds of scrap iron, scrap, iron pin, wood and other processing industries shipping.

Forklift Movable Leather Grab Attachment F-DBPGJ3A30

Specially designed for cowhine processing plant, it can increase the flexibility of the forklift, so that the special working conditions that the original forklift can noe opreate can be easily solved.

Forklift Paper Grab Attachment F-GA-09

The type F-GA-09 Grab Attachment has been designed to grab and secure poles or pipes from 170mm to 900mm in outside diameter and safely lift and transport these by Forklift about the worksite.