The IC695CPE400 is a compact Outcome Optimizing Controller from the GE Fanuc PACSystems RX3i Series. IC695CPE400 is a rackless and standalone part of what GE calls its Industrial Internet Control System. The controller supports PROFINET, the standard protocol for industrial networking.
IC695CPE400 provides communication and analytics by leveraging a platform called Field Agent as a hypervisor. Field Agent enables the controller to interact with applications that can be either edge-based or cloud-based. In other words, the controller works equally well with applications that perform computations at the sensor level or "edge" of the network, and applications that parse data on remote servers. Firmware in IC695CPE400 uses an Ethernet port to automatically upgrade itself on power-up as needed. The controller has 64 MB of RAM and 64 MB of non-volatile flash memory. IC695CPE400 can use an optional energy pack (IC695ACC403) as a memory backup mechanism. With that energy pack, when unexpected fluctuations or outages cause the system to lose power, the controller preserves your data by writing it from short-term memory to long-term memory, where it can be recovered when power is restored.
You can program IC695CPE400 in Ladder Diagram, Structured Text, Function Block Diagram, or C syntax. The controller comes equipped with four independent Ethernet 10/100/1000 LANs. LAN1 uses a dedicated RJ45 connector on the front panel of the IC695CPE400 chassis. LAN2 and LAN3 attach through a pair of internally-switched RJ45 connectors. LAN4 plugs into the underside of the unit, and is used to connect the Field Agent platform.
sales7@amikon.cn 
86-18965423501 
86-18965423501
AMKPLC 
