General Electric IC220PBI002-DA Network Interface Unit

General Electric IC220PBI002-DA Network Interface Unit

Dimensions: 

12.5x11.5x8cm

Weight:

0.32kg

Master Gateway：

-25to 85°C

Voltage：

7.5V

The NIU is located to the left of the other modules. Together, the NIU and the

modules selected for the application function as an I/O Station. The I/O Station can

include up to 63 I/O modules.

IC220PBI002-DA

IC220PBI002 is a PROFIBUS - DP Network Interface Module and is manufactured by GE Fanuc part of the Versapoint Series. The data rate can be as high as 12 megabits per second. On the unit, serial communications are supported. The unit does not support firmware upgrades. The nominal power input voltage is 24 Volt DC. On the unit, there are a total of 63 supported modules. This module does not have web support for a numeric LCD display. The maximum current available for this board is 8 amperes.

Local Bus UA has a current of 500 mA. The communication module, the needed terminal strip, has ten strips. The Profibus-DP Network Interface Unit, connectors, DIP switches, and LEDs are all part of the PROFIBUS system.

On a Profibus-DP network, a group of interconnected VersaPoint I/O modules can be connected as a slave. The network and modules are connected by the VersaPoint Profibus-DP Network Interface Unit. The IC220PBI002 module can handle up to 176 bytes of input and output data per station.