Guangzhou zhilitong Electromechanical Co.,Ltd-sfyh.com

Probe for Uninsulated Live Parts

Model ZLT-U02, Conforms to :UL1278 Fig 8.1(PA130A),UL507 Fig 9.1(PA135A).

Test Probe

Model ZLT-U03, Conforms to UL standard, Φ1/4 inch , 3 inch long.

Test Probe for Film Coated Wire

Model ZLT-U04, Conforms to: UL1278 figure 8.2 (PA140A), UL398 figure 8.2 (PA170B).

Hazardous Moving Parts Probe

Model ZLT-U05, Conform to:UL507 figure 8.1(PA160B),UL1278 figure 9.1(PA160)

Cone Probe

Model ZLT-U06, Conform to the UL1278 figure 10.1. The handle is made of nylon. The finger is made of stainless steel.

Bar Probe

Model ZLT-U07 , Conform to the UL1278 figure 10.2. The handle is made of nylon. The finger is made of hardened steel.

Triangle Probe

Model ZLT-U08 , Conform to the UL1278 figure 10.3. The handle is made of nylon.The finger is made of hardened steel.

Rod Probe

Model ZLT-U09 Conform to the UL1278 figure 10.4. The handle is made of nylon. The finger is made of hardened steel.

Test Rod Probe

Model ZLT-U10 For testing enclosure rigidity in accordance with of UL982 figure 40.7 and CSA versions of this Standard. Handle is nylon, tip is stainless steel.

Wedge Probe

Model ZLT-U14 Conform to the UL60950 Figure NAF.2 and NAF.3 (S5366), IEC62368 figure V.4 and for paper document shredders.

UL Children Safety Probe

Model ZLT-U15 Conform to UL1017-2010 figure 25 and 26, made entirely of stainless steel.

Straight Unjointed Test Probes

Model ZLT-U01A , conforms to IEC 62368-1 Annex V and figure V.1,

Jointed Test Finger

Model: ZLT-I02D . Conform to Japanese Standards.

Articulate Probe

Model: ZLT-C01 , Conform to the CSA C22.2. Handle is nylon, tip is stainless steel.

Test Arm

Model: ZLT-E01, Conform to the EN13683. Handle is nylon, tip is stainless steel.

Glow Wire Tester

ZLT-GTR, to determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10:2013, IEC60335, IEC60598 and other standards.

Glow Wire Tester ZLT-GTR

ZLT-GTR, accordance with IEC60695-2-10(2013), IEC60335, IEC60598 and other standards.

Needle flame Tester

ZLT-ZY2, the instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2

Tracking Tester ZLT-LDQ1

ZLT-LDQ1, determination of comparative tracking index of solid electrical insulating materials,conform to IEC60112,IEC 60335-1, IEC60598-1, IEC60884-1

Horizontal Vertical Flame Tester ZLT-UL94

ZLT-UL94, the combustion test device of plastic materials represented by UL-94. It can perform each test of HB, V0 to V2, 5V and VTM, HBF

Horizontal Vertical Flame Tester ZLT-HV50

ZLT-HV50, conform to UL94, IEC60695-11-4, IEC60695-11-10 standard, Test Flame 50W (burning test for V-0,V-1,V-2 classification .

Burning Characteristics Tester

ZLT-HV4, applicable to the single wire and cable, and soft line horizontal (FT1), vertical (VW1) combustion test,Conform to standard UL1581:1060/1061/1080/1090/1100

Single Vertical Insulated Wire Flame Chamber Tester

ZLT-BS1, conform to standard IEC60332-1-1,IEC60332-1-2,testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fiber cable

Hot Wire Coil Ignitability Test Apparatus

ZLT-HW1, to measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20. To measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20.

Horizontal Vertical Flame Test Chamber ZLT-HV500

ZLT-HV500, conform to UL94, IEC60695-11-3, IEC60695-11-20 standard, Test Flame 500W (burning test for 5VA, V5VB classification .

Clearance Gauge

ZLT-ZL4, Clearance Gauge , conform to IEC 60695-11-10 Figure 6

High Current ARC Ignition Tester

ZLT-DQY, according to UL746A,UL1082

Internal Wire Flexibility Tester

ZLT-WM1A, in accordance with IEC60335-1 clause 23.3, For continuous bending tests by swivelling movements to check internal wire in normal use or maintenance

Flexible Cables Flexing Tester ZLT-QL1

ZLT-QL1. This Tester is checking mechanical strength of completed flexible cables,according to IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.

Swivel Test Machine

ZLT-JDW1. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.

Power Cord Flexibility Tester

ZLT-JDW3R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 -1. 3 Working Station for 3 specimens simultaneously.

Abrasion Resistance Testing Machine

ZLT-DYJ2. To determine the durability of cable coverings, flexible insulating tubing, coats of lacquer, inscriptions, designations and the like at room temperature by scraping to and fro, according to UL1581 test 1690, EN 60730

Tinsel Cord Bending Test Apparatus

ZLT-JDW2R. To determine the bendability of the tinsel cord,in accordance with IEC 60227-2 clause 3.2 ,figure 2 and IEC 60227-1 clause 5.6.3.2.

Power Cord Strain and Twist Tester

ZLT-LN1. To determine the strain and twisting of the supply cord where it enters the appliance, in accordance with IEC60335-1 clause 25.15.

Cold Bend Test Apparatus

ZLT-SDJ1. To determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60811-1-4 clause 8.1 figure 1

Thermal Deformation Test Device

ZLT-JR1. To determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.

Tinsel Cord Snatch Test Device

ZLT-ST2, to determine the impactive effect of the tinsel cord,in accordance with IEC 60227-2 clause 3.3 and IEC 60227-1 clause 5.6.3.4.

Three Pulley And Two Pulley Cable Flexing Testing Machine

ZLT-QL1A. adding three pulley flexing test, have a modified carrier C, For checking the mechanical durability of flexible cords and cables by bending them back and forth, according to IEC60245-2/1998-04 figure 1, IEC 60245-2 figure 6 and clause 3.5 table 3. IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11

Flexible Cord Abrupt Pull Test Apparatus

Conform to UL 817 clause 99 and figure 99.1 -99.2, for abrupt pull test, rotation test,drop weight test and carrying current test of grouding conductor :0.1-50A

Lift Cables Flexing Tester

To determine the mechanical strength of lift cables,according to IEC60227-6 clause 4.4.1 and figure 3.

iec accessibility test probe

ul accessibility test probe

accessibility test finger probe

Company profile

All products