Guangzhou zhilitong Electromechanical Co.,Ltd-sfyh.com

Socket-outlet Torque Balance

ZLT-LJ2, for measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2.

Flexing Test Swivel Machine

ZLT-DW2, for continuous bending tests by swivelling movements to check 6 cables simultaneously, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.

Equipment to Load the Samples with Current

ZLT-HZ1, installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.

Cord Anchorage Torque Test Device

ZLT-LJ3, this device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non detachable flexible cords according to IEC60884 1 clause 23.2(table 18),VDE0620 clause23.2(table18),IEC60335 1 table12 clause 25.15.

Ball Pressure Test Device

ZLT-QY1, to determine the dimensional stability of parts consisting of non-ceramic, non metallic insulating materials according to IEC60695 10 2, IEC60335 1 clause 30.1, IEC60598 1 clause 13.2.1 Fig.10, IEC60884 Fig.37, IEC60320 Fig. 23, VDE 0620 Fig.19, IEC60669 1 Fig.25, IEC60670 Fig.5, IEC60967 Fig. 19, etc

Tumbling Barrel Test Machine

ZLT-GT1, is to determine the mechanical strength of lamp or electrical appliances or electrical components in accordance with IEC60598 figure 25 and VDE0620 Bild 27.

Cord Anchorage Testing Machine

ZLT-DY1, for testing cable connections with intermittent tensile load in according to IEC60884/2006 figure 20, VDE0620 Bild 20.

Heat Compression Test Apparatus

ZLT-RS1, to determine the verification of resistance of accessories and surface type mounting at a temperature of (80±2)℃, according to IEC 60884 1 figure 38 and clause 25.4, VDE 0620 figure 37, BS 1363 figure 23.

Verify the Fixation of Pins in the Body of the Plug Test Device

ZLT-CX1, to determine the fixation of pins in the body of the plug, conform to IEC60884 1 figure 30.

Socket Plug Strength Test Device

ZLT-CB1, for verification of the maximum and minimum withdrawal force of the socket and plug, according to IEC60884 1 figure 18 and 19, VDE0620-2005 bild 19.

Indentation Test Device

ZLT-HP1, for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10.

Clamping Device Test Machine

ZLT-DSG2, to test the reliability of clamping devices to hold flexible electrical conductors, according to IEC60884 1 figure 11 and clause 12.2.5, VDE0620

Flexion Test Apparatus

ZLT-DSG3, similar to ZLT DSG2, but according to IEC60947 figure 1 and clause 8.2.4.3, table 5

Lateral Strain Test Device

ZLT-HY1, to determine the lateral strain imposed by equipment likely to be introduced into the socket outlets, which having ratings up to and including 16 A and 250 V, in according to IEC60884-1 figure 13 and clause 13.14, VDE0620,

Compression Test Device

ZLT-YS1, to determine the contact pressure of side earthing contacts of socket outlets, the temperature of the pressure plate, of the base and of the specimens being (23±2)℃ and the force applied being 300 N, in accordance with IEC60884 1 figure 8, VDE0620 figure 8.

Plug Pin Abrasion Testing Machine

ZLT-CTZ1, to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to IEC60884 1 Fig 28, EN 50075 Fig 9, VDE0620 bile 29 and BS1363 Fig 9.

Low Temperature Ram Impact Test Apparatus

ZLT-DCJ1, to determine the mechanical strength of insulated cords, cables, couplers, plug pin insulating sleeves and enclosures in the cold, according to IEC60884 1 figure 27 and 42, IEC60811-1-4 figure 2, VDE0620 figure 28 and 41

Non Solid Pins Test Device

ZLT-CXY1, to determine the mechanical strength of non solid pins, accordance with IEC80884 1 figure14,VDE 0620 Bild 12.

Multiple Portable Socket outlets Mechanical Strength Test Device

ZLT-MS, to determine the mechanical strength test on multiple portable socket outlets, in according to IEC60884 1 figure 29,

Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus

ZLT-AH1, to determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,

Shrouds Pressure Test Apparatus

ZLT-SP1, for testing the deformation and behavior by subjecting to a pressure, according to IEC 60238 figure 9, IEC 60320 1 figure 20, EN 60238 figure 9

Pulling Test Apparatus

ZLT-SP2, to determine the mechanical strength of the connector, accordance with IEC60320 1 figure 19 and clause 23.3,

Test Cylinder

ZLT-GP, to determine the fixed structure reliability of surface type socket outlets, in accordance with IEC60884 1 clause 24.3

Plug and Socket Endurance Testing Machine

ZLT-CS1, to test plugs and socket-outlets, cable couplers and appliance couplers, according to IEC 60884-1 figure 16 and clause 20.

Plug and Socket Endurance Lab Test Equipment

ZLT-CS2, according to IEC 60884-1 figure 16 and clause 20. 2 working station for 2 specimen simultaneously.

Plug and Socket Endurance Tester

ZLT-CS3, according to IEC 60884-1 figure 16 and clause 20. 3 working station for 3 specimen simultaneously.

Switch Life Test Machine

ZLT-SW, to test switches having rated resistive-load currents up to 16 A,in accordance with IEC60669-1 clause 18 and 19

IEC60312 figure 16 Tumbling Barrel Safety Test Equipment

ZLT-GT4, similar to ZLT-GT2, but of larger dimensions for testing of accessories for vacuum cleaners, according to IEC60312 figure 16.

Drop And Fall Tester

ZLT-GT3, similar to ZLT-GT2, but according to BS1363 figure 20.

Tumbling Barrel Lab Test Apparatus

ZLT-GT2, is to determine the mechanical strength of electrical appliances or electrical components in accordance with IEC60068-2-32 Amendment 2

Tumbling Barrel Testing Machine

similar to ZLT-GT2, but according to IEC60730 figure 5.

Cord Anchorage Torque Test Apparatus

ZLT-LJ4, to torque test of plugs and connectors provided with a flexible cable,rated current 13A to 400A, according to IEC62196 clause 25.3 and table 19.

Covering Scratch Test Machine

ZLT-GC1, to determine the adherence and the durability of protective coverings on printed circuit board and of insulating layers on accessible hazardous parts or metal parts，according to IEC60950 figure 2K and clause 2.10.8.4,IEC60335-1 clause 21.2

Inclined Plane Test Device

ZLT-WD1. Table Diameter :600mm ,to determine the stability of electric appliances ,in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1

Flexible Pipe Winding Test Device

ZLT-SDW1. To determine the mechanical strength of sealed lighting chains, in accordance with the IEC60598-2-20 Fig 3 and clause 20.6.14.

Lampholder Contacts Security Test Device

ZLT-DTC. To check the security of lampholder contacts, and conform to the IEC60598-2-20 Fig 2 and clause 20.11.3.

Toaster Switch Endurance Test Machine

ZLT-DSK. To determine on off life of switch of the toasters, in accordance with the IEC60335-2-9 clause 19.101.

Cordless Kettle Insert Pull Tester

ZLT-SW1. To use for the insert-pull test of cordless kettle and foundation, in accordance with IEC60335-2-15 clause 22.103

Screwed Glands Test Device

ZLT-LWM1. To determine the torque strength of the screwed glands，in accordance with the IEC60598-1 clause 4.12.5.

Automatic Cord Reels Endurance Tester

ZLT-JX1. To determine endurance of automatic cord reels , in accordance with IEC60335-1 clause 22.16 and UL1017 clause 5.16.

iec accessibility test probe

ul accessibility test probe

accessibility test finger probe

Company profile

All products