All products

HWIC-1CE1T1-PRI 1 port channelized T1/E1 and PRI HWIC (data only)

The Cisco® Channelized T1/E1 and ISDN PRI High-Speed WAN Module HWIC-1CE1T1-PRI combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. With flexible WAN connectivity options, together with integrated routing, security, voice, and wireless capabilities, the Cisco Integrated Services Routers can meet every need of enterprise-class branch offices today and in the future. Three versions are available, 1- and 2-port cards in a single-wide high-speed WAN interface card (HWIC), and a 8-port cards in a single-wide network module. The different versions help enable customers to deploy different port densities according to the needs of individual offices.

HWIC-1DSU-T1 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. These HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-1FE ^1-port 10/100 Routed Port HWIC

The Layer 3 Cisco 1-Port Fast Ethernet High-Speed WAN interface card (HWIC) supported on the Cisco 1841, Cisco 2800, and Cisco 3800 Series Integrated Services Routers offers small-to-large-sized businesses and enterprise branch-office customers the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities.

HWIC-1T 1-Port Serial WAN Interface Card

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. These HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-2CE1T1-PRI 2 port channelized T1/E1. and PRI HWIC (data only)

The Cisco® Channelized T1/E1 and ISDN PRI High-Speed WAN Module HWIC-2CE1T1-PRI combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. With flexible WAN connectivity options, together with integrated routing, security, voice, and wireless capabilities, the Cisco Integrated Services Routers can meet every need of enterprise-class branch offices today and in the future. Three versions are available, 1- and 2-port cards in a single-wide high-speed WAN interface card (HWIC), and a 8-port cards in a single-wide network module. The different versions help enable customers to deploy different port densities according to the needs of individual offices.

C6800-SUP6T-XL Catalyst 6800 Sup6T (440G/slot) with 8x10GE, 2x40GE (XL)

Catalyst 6800 Series Supervisor Engine 6T XL Spare - Sup6T (440G/slot) with 8x10GE, 2x40GE (XL).

C6832-X-LE Cisco Catalyst 6832-X-Chassis (Standard Tables)

C1-C6832-X-LE - Cisco ONE Catalyst 6800 Series Platform.

HWIC-2FE Two 10/100 routed port HWIC

The 2-port (HWIC-2FE) card offers small-to-large-sized businesses and enterprise branch-office customers the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities.

HWIC-2SHDSL 2-pair G.SHDSL HWIC

Cisco Integrated Services Routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 2- and 4-Pair Symmetric High-Bit-Rate DSL High-Speed WAN Interface Cards offer G.SHDSL based WAN connectivity for modular routers deployed in small to medium-sized businesses and enterprise branch offices. The 2-pair (HWIC-2SHDSL) and 4-pair (HWIC-4SHDSL) symmetric high-bit-rate DSL high-speed WAN interface cards (HWICs) provide G.SHDSL connectivity to a Wide Area Network. The 4-pair symmetric G.SHDSL HWIC provides two ports of 4-wire or four ports of 2-wire connectivity options, whereas the 2-pair G.SHDSL HWIC provides two ports of 2-wire or one port of 4-wire connectivity options. The 4-pair symmetric G.SHDSL HWIC also allows bonding single or dual-pair G.SHDSL ports up to a single 8-wire interface with increased bandwidth by using Inverse Multiplexing over ATM (IMA) or data interleaving with M-pair mode. These cards are supported in all integrated services routers that have HWIC slots.

HWIC-2T 2-Port Serial WAN Interface Card

Cisco HWIC-2T is a 2-port serial WAN interface card, made for Cisco1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers. HWICs help customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. You can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

HWIC-4A/S 4-Port Async/Sync Serial HWIC

HWIC-4A/S is 4 ports low-speed synchronous/asynchronous interface module for 1800/1900/2800/2900/3800/3900 Series integrated services Routers. With integration of module to the router can either transporting traditional traffic across a TCP/IP network or connecting with console and craft ports to manage network remotely. HWIC-4T supports multiprotocol that includes EIA-232, EIA-449, V.35, and X.21 in DTE or DCE mode and EIA-530 and EIA-530A in DTE mode with low speed up to 256 Kbps.

WS-C3850-48XS-E Cisco Catalyst 3850 48 Port 10G Fiber Switch IP Services

Standalone Cisco Catalyst 3850 Switch that supports SFP+ transceivers, 48 ports that support up to 10G, and 4 QSFP ports that support up to 40G, and 750 WAC front-to-back power supply. 1 RU.

ASR1000-RP3= Cisco ASR1000 Route Processor 3

This ASR1000-RP2 is similar with the ASR1000-RP2=. The ASR1000-RP2= is a spare one.

ASR1000-6TGE= ASR1000 6 port 10 GE Line Card

This line card has twenty 1 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports.

HWIC-4ESW 4pt 10/100 Ethernet switch interface card REMANUFACTURED

The 4-port Cisco® EtherSwitch® 10/100 high-speed WAN interface cards (HWICs) HWIC-4ESW supported on the Cisco 1800 (modular)/1941, Cisco 2800/2900, and Cisco 3800/3900 series integrated services routers offer small-to-large-size businesses and enterprise branch office customers the option to integrate switching and routing in one device. This combination offers ease of configuration, deployment, and management while using the powerful characteristics of Cisco routing and Cisco Catalyst® switching features.

Showing 43 to 86 of 86 (43 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.