iec 61032 test probe 11-sfyh.com

Jointed IEC Test Finger

ZLT-I02, conform to IEC61032 test probe B, IEC60950 figure 2A, IEC60529IP2, UL1278 figure 8.4 etc

Articulating Finger Probe

Model :ZLT-I02A , Conform to the IEC60335-1 clause 20.2.

Jointed Test Finger Probe for Blenders

ZLT-I02B, Conform to the IEC60335-2-14 clause 20.2

Jointed Finger Probe for Electric Kitchen Machines

Model: ZLT-I02C, Conform to the IEC60335-2-64 clause 20.2

8 mm Blender Probe

ZLT-P01 Blender Probe meets IEC60335 2 14,clause 20.102,stainless steel rod has a diameter of 8.0mm*80mm long

IEC Steel Rod 2.5 mm, 100mm Long,Spherical Stop

ZLT-I03, Meets IEC61032 test probe C and EN Standards, including IEC 60529 for IP3 and suffix C codes

IEC Steel Wire

Model ZLT-I04 , Meets IEC61032 test probe D and EN Standards including IEC 60529 for IP4 and suffix D codes.

Test Sphere Φ50 mm without Handle

ZLT-I05, conforms to IEC 60529 IP1 and IEC61032 test probe 5.

Test Sphere Φ12.5 mm

verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 12.5mm or greater. conforms to IEC60529 IP2 and IEC61032 test probe 2

Rigid Test Finger

Used for force applications on openings, as required by IEC61032 Test probe 11

IEC Unjointed Finger

according to IEC60950 clause 2.1.1.1.

Rigid Test Finger with Dynamometer

As per IEC61032 Test probe 11, with dynamometer

Long Test Pin

verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC61032 Test probe 12 & EN requirements

Short Test Pin

verify the protection against access to hazardous live parts in class 0 equipment and class II equipment

Test Bar

Conform to IEC61032 Test probe 14

Test Sphere Φ50 mm with Handle

ZLT-I01, this probe is conform to IEC61032 test probe A and IEC60529 IP1 and other standard. Without dynamometer, model ZLT-I01 With dynamometer 50N±5N, model ZLT-I01T