The pharmaceutical industry often uses dry or wet gasification hydrogen peroxide disinfection and sterilization systems. Due to the strong permeability of hydrogen peroxide, the intrusion reaches sub-micron level, which will be from the surface of the purification plate and the surface of the purificationdoor. The crack penetrates into the interior, causing the surface of the clean room wall and the cleanroom door to bulge, falling off, and tearing of the paint.HPL cleanroom wall panel resistant to VHP disinfection.
Advantage：
-
Wiskind HPL clean room wall system is strong at any point on the board due to its uniform structure and compactness.The color tone, pattern and texture of the surface of the melamine board are quite abundant, so it can be used out doors with corresponding strength requirements and appearance requirements.
-
The beauty of the product lasts for a long time, and HPL's impact absorption and special manufacturing process make it have a certain degree of seismic resistance.
-
HPL has excellent impact resistance, water resistance, moisture resistance, chemical resistance, heat resistance, abrasion resistance, chemical resistance, and weather resistance.Sunlight does not cause discoloration or fading. In addition, the product is difficult to get dirty, easy to clean, and easy to maintain.
Introduction to HPL
HPL clean room panel, that is, thickened double veneer high pressure refractory decorative plate, can be used as structural material without adhering to the base material.With excellent mechanical properties, it is suitable for load-bearing table.Widely used in indoor wall, bathroom partition, dressing room partition, space partition, storage cabinets and all kinds of mesa, to provide single or double unified decorative effect.General size: 4 'x8' (1220mmx2440mm) 5’x10’ (1525mmx3050mm)
-
rich color, strong decoration, pure color, wood, stone, color and other decorative effects are optional • can be combined with a variety of surface texture to present excellent visual and real touch.
-
compact and stable structure, high strength and good toughness.
-
wear resistant surface, durable.
-
high crash resistance.
-
strong compression resistance, high hardness, good load-bearing performance.
-
customizable personalized patterns.
HPL Maintenance instructions
1) general pollution can be cleaned with ordinary wet cloth.
2) for minor stains, use warm water and neutral soap to clean the surface.
3) stubborn stains should be cleaned with high-concentration detergent, or wiped with alcohol, acetone and other solvents.
5) use soft dry cloth to wipe after cleaning.
6) do not use steel brush or polishing agent with abrasive to clean, as it may scratch the surface of the plate.
7) do not use sharp hard objects to mark the surface of plates.
8) do not put overhot objects directly on the board surface.
9) do not use abrasives or non-neutral cleaners.
