Industrial Water Cooling Tower
The features of cooling tower:
1.This industrial cooling tower has low vibration, low noise, high efficiency and low power consumption. The shell parts are made of smooth stainless steel plate, and the inner layer of the side plate is permeated and heat-insulated with modular design, flexible assembly, long-lasting deformation. No corrosion, long service life.
2. The tower body is made of high-quality glass steel, and the surface is made of gel coat resin. It has the characteristics of anti-aging, corrosion resistance, bright and clean, and no leg color.
3. The fan is equipped with aluminum alloy and glass fiber reinforced plastic. It has the characteristics of reasonable tower crane matching, large air volume and low noise.
4. The motor adopts the special motor for the outdoor cooling tower, and the reducer uses the special reducer for the cooling tower. It has the characteristics of stable operation, low energy consumption, long life and low noise.
Working principle:
1, Working fluid (water, oil o other liquid) flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by the coil and become the saturated vapor when meeting the water and air.
2, the heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.
3, the most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high-temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).
How to choose:
If you wanna buy a suitable machine, please confirm the folling data:
* The water flow per hour
* The water temperature and your target temperature
* The voltage in your country (eg: 380V/60HZ,3PH)
* Your special requirement (eg: small space, poor water quality,strong acid,strong base)
Note:
The standard design conditions of this series cooling tower is that the design wet bulb temp is 28 ℃, the inlet water temp is 37 ℃ , outlet water temp is 32℃,so cooling temp Δt=5℃, approach the outlet T2-wet bulb temp =4 ℃
Contact us:
Slaes engineer: Vincent Lau
Email: Vincent@hstars.com.cn
Whatsapp/Wechat:+86 13570527221
