multiple jet
water meter, the operating principle is based on a system
that forces the passage of the incoming water through a precise series of open
pipes in a capsule. This represents the distributor, which contains the
turbine inside. The water inlet produces a series of symmetrical jets,
which constantly impact the turbine, which thus remains in equilibrium.
Muti jet water
meters that provide accurate and reliable water consumption
measurement. fast and easy to install water meters are the right and safe
way of designing and installing, as well as being used as a tenant or property
owner.
These water meter are
for record the total water volumetric flow meter in cubic, liter which pass
through the closed pipe line, like water utilities, municipal water supply,
etc.
Portable multi jet water meter equiped with Lora networking by M-bus or RS485 wire or via wirless module,which make it so easy to remote reading or control remotely .DN15-50 sizes range ,best for residential ,domestic apartments
Portable multi jet water meter equiped with Lora networking by M-bus or RS485 wire or via wirless module,which make it so easy to remote reading or control remotely .DN15-50 sizes range ,best for residential ,domestic apartments
The electro-mechanical separation wire direct
reading meter does not change the water meter structure and does not affect the
precision and sensitivity of the traditional wet water meter.
Multi-Jet Water Meters (Model LXSG 1E-50E, ½ "- 2") with screw thread, water runs through multi-jet paddle. The paddle wheel is so symmetrically loaded, so there is less wear.
this type of water meter are of horizontal to pipeline ,brass body ,and multi jet water meter principle , consists of multi jet water meter, and wired Mbus communication. Available in sizes 15mm to 50 mm for residential application
a multi jet or single jet type water meter which measuring total volume of water passing through the pipe and mainly for household ,residential ,domestic small water flow.its a kind of vane wheel water meter.it mainly charictarized as easy handle,accurate in use of cold water or hot water,the impeller is placed in center of meter chamber and circled by jet inlets.inlet and outlets seated oppisitely .the register totalizer dial is driven by a gear .
LXSG-15R~25R model meter for cold drinking water of 15, 20 and 25 mm. (1/2 ", ¾" and 1 ") in diameter, Brand EMI, metrology class B, velocity and multi-jet type, horizontal installation, with transmission
The water meter is mainly used for measuring the total volume of water flowing through the tap and water pipe, and is suitable for water for small industrial enterprises and domestic water. This water meter is not suitable for hot water and corrosive liquids.
The LXSG is a multi-jet meter used to measure the flow of cold water and is capable of measuring any water quality, including extremely rigid, scaling or suspended particles, because the wheel is sealed in a special liquid and is equipped with pressure compensation devices. This sealed wheel will not touch the water flowing through the meter, making the reading always clear and easy to read.
multi-jet water sub-meter is designed to measure cold potable water where flow is in one direction for residential applications. Available in sizes 1/2" through 2" and with optional pulse or encoded output.
water meters EMI® for its sensitivity and accuracy significantly contribute to a more equitable allocation of water consumption, greatly reducing the differences in the measurements between the base of the building and the sum of residential water meters. At present it is one of the most accurate residential water meters in its class
A dry rotating counter connected to a magnetic coupling measuring part, standardly pre-equipped for installation of the CYBLE communication member. Cover IP68 - copper sheath and mineral glass.
The water meter measures, registers and indicates the volume of water in cubic meters that passes through it.
Compliance with standard: ISO 4064 Class B