Model

           RTL1500-I                                                              RTL1500-II                    

Power

            6KW                                                                           6KW                               

Tube

High purity corundum tube: 60/80*1200mm (tube diameter optional)

Two furnace plugs are placed on each side. The furnace plug can block the heat radiation in the center of the furnace tube and must be placed in the correct position in the furnace before heating

Supply voltage

                 220V                                                          220V

Phase

         single phase                                                    single phase

Heating element

  silicon carbide rod                                                silicon carbide rod

Furnace tube rotation speed

The variable speed motor is adopted, and the speed can be adjusted between (1-25 RPM /min)

Motor power

                                                                   40W

Angle may tilt

                                                                 0-30degree

Driving method

                                                               Belt and gear

Control mode

Use Yudian program temperature control instrument (standard)

1. 30-segment program temperature control intelligent PID adjustment.

2. With over-temperature protection, the electric furnace heating circuit will be automatically cut off when the temperature is over-temperature or when the couple is broken. ON, the ON light on the panel is off, the OFF light is on, and the electric furnace is limitedly protected).

3. With 485 communication interface (standard with optional software)

4. It has a power failure protection function, that is, when the furnace is powered on after the power is turned off, the program does not start from the initial temperature, but starts from the furnace temperature when the power is off.

5.The meter has the function of temperature self-tuning

(you need to pay extra for the replacement of imported instruments, optional)

FP93 instrument                                  EUROTHERM instrument                              Touch screen instrument

(shimaden, Japan)

Chamber material

1. High-quality high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.

2. It adopts Japanese technology to form, without slag and good heat preservation.

Flange and valve

Control accuracy

                                                         +/- 1 ℃

Trigger

                                              Phase-shifted trigger

Electric appliance

                                                   Zhejiang chint

Silicon controlled

                                      106/16E SEMIKRON

Max temp

                                                    1500 ℃

Rated temp

                                                    1450 ℃

Heating rate

                        ≤20 ℃/ Min(Can be modified as required)

Recommended rate of heating

                                        ≤10 ℃/ Min

 Thermocouple Type

        S                                                                     S

Length of heating section

   390mm                                                     390mm

Constant temperature length

    150-200mm                                          150-200mm