OLT-DGJ-50F/100F/200F freeze dryer, in situ freeze drying. It has changed the tedious operation of the past drying process, prevented the pollution of materials, realized the automation of drying and sublimation, and was suitable for pilot production or small batch production.
The model has the function of diaphragm heating and programming. It can memorize freeze-drying curve and facilitate users to observe the freeze-drying process of materials.
1,The pre freeze drying process is carried out in situ, which reduces the tedious operation of the drying process and realizes automation.
2,The temperature error of the shelf is less than 1 degrees centigrade, and the drying effect is uniform.
3,The shelf temperature can be adjusted, controlled, fumbled, pilot and production processes.
4,Because the drying chamber and cold trap are separated structures, the water catching capacity is strong and the drying time is short.
5,Touch screen operation, PID control, display drying curve;
It can store 20 programs, each program can be set up 36 segments. The freeze dryer can modify program parameters during operation and record the final drying curve.
6,Square pallet is not easy to deform, easy to operate and easy to clean.
7,The inflatable valve can be used to dry the inert gas.
8,The drying room adopts highly transparent and colorless transparent plexiglass door, and can observe the change process of material clearly during operation.
9,Optional eutectic point testing device;
10,Equipped with manual and automatic two modes of operation, you can manually explore the freeze-drying curve of new materials.
