Professional production of high frequency preheating machine 3KW ~ 10KW
1. The melamine preheater has passed CE certification, and has been exported to countries all over the world for a long time.
2. It's suitable for melamine, urea plastic, epoxy resin, phenolic resin and other thermosetting molding materials before the resin powder (cake) preheating softening preforming process.
3. The heating is fast and even and the heating frequency conforms to international standards.
Advantage of preheating
The raw material heated by the high-frequency preheating machine has the following advantages
1. Can enhance the fluidity
2. Can shorten the die casting time
3. Can eliminate the internal stress of the material
4. Can eliminate the product water ripple
5. Can improve the finish of the finished product
6. Can save the amount of material
7. Can extend the life of the mold
Technical Parameters
|
No
|
Content.
|
HGY-720
|
|
1
|
Output
|
7KW
|
|
2
|
Power Source
|
3Φ220V
380V
415V
|
|
3
|
Power Input
|
13KVA
|
|
4
|
Oscillation Frequency
|
62MHZ
|
|
5
|
Vacuum Tube
|
E3069RB
|
|
6
|
Voltage Switching
|
3-stage
|
|
7
|
Time
|
999.9S
|
|
8
|
Preheating Power
|
110℃ Within 60 secs
|
|
9
|
Phenolic Resin
|
1500gr
|
|
10
|
Melamine Moulding
Compound
|
1200gr
|
|
11
|
Urea Moulding Compound
|
1500gr
|
|
12
|
Electrode Size
|
340×380m/m
|
|
13
|
Electrode Spacing
|
30-70m/m
|
|
14
|
Machine Dimensions (W
D H)
|
600×850×1520
|
|
15
|
Machine Weight
|
320KG
|
■ PS: Specifications subject to change without notice.
Operation Site Requirements
1. There should be a space of 30cm around the equipment, otherwise it may affect the heat dissipation.
2. The location of the equipment should be well ventilated.
3. The location of the equipment should avoid dust and vibration.
4. The location of the equipment should avoid moisture, rain and corrosive substances.
