Feature
Non VOC and non-phosphate reactive product
Can increase the coating adhesion and anti-corrosion performance
Excellent corrosion resistant comparable with zinc phosphating
Application process
Appearance: Yellowish liquid
Recommended dosage: 3% (EDTA value is 6.0 pt)
Temperature: Room temperature
Processing time: 1-3 min
Spray pressure: 0.06~0.15MPa
pH: 4.4-5.4
Normally add 30 kg MC-FM7010 in 1000 L water at the beginning. Then add the additive-001 and additive-002 to regulate the pH to the optimal value.
1. EDTA value test method: Firstly, add 10ml aqueous into an Erlenmeyer flask. Then add 20ml WL-A and 5ml 5% hydroxylamine hydrochloride aqueous. Thirdly, add 0.05-0.1ml WL-B indicator. Fourthly, heat the solution under 80~90℃ (boiling). Finally, titrate it using 1.0 mol/L EDTA standard solution and until the solution changes from amaranth to bright yellow. The consumption volume of 1.0 mol/L EDTA standard solution is the EDTA value (pt).
2. Supplement: Add 5.3KG MC-FM7010 into solution while the EDTA value decreases by 1.0 pt. And add 95 ml additve-001, while the pH increase by 0.1 pt.
Note: Must wear safety glasses, rubber gloves and protective clothing of chemical pollution, avoid contact with skin, do not inhale vapors.
Chemical composition
MC-FM7010: Non-phosphate treatment agent
Additive-001: Alkali treatment agent
Additive-002: Acid treatment agent
Technical process
①Water wash---②Degreasing---③Degreasing---④Water wash---⑤Water wash ---⑥MC-FM7010 ---⑦Water wash---⑧Water wash---⑨Post treatmentWash immediately with water when skin encounter the cleaning agent.
Application
-Cast iron parts, cold-rolled sheet
-Aluminum and galvanized steel profiles surface treatment etc.
Storage and handling
Available in 200 kg/ barrel or 25 kg/ barrel
Storage period: ~12 months in closed containers, shady and dry place