9890 000 02906 X-RAY Product Overview:
1.A densitometer:
a) Is used to print a test strip onto the film.
b) Measures patient size to help estimate exposures.
c) Measures the degree of film density.
2. The X-ray room has an older installation with a floor ceiling tube stand.The X-ray tube appears centred to the table Bucky,but not to the upright Bucky.
a) Reposition the wall Bucky.
b) Test the tube stand cross-arm in case it is not truly horizontal.
c) Adjust the X-ray tube housing in the trunnion rings.
3. The effective calibration of the tomography fulcrum height will be changed if:
a) The exposure time is too short.
b) The X-ray tube is rotated from its central position.
c) The X-ray tube is set to the incorrect height.
