Guangzhou zhilitong Electromechanical Co.,Ltd-sfyh.com

Socket-outlet Torque Balance

ZLT-LJ2, for measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2.

Flexing Test Swivel Machine

ZLT-DW2, for continuous bending tests by swivelling movements to check 6 cables simultaneously, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.

Equipment to Load the Samples with Current

ZLT-HZ1, installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.

Cord Anchorage Torque Test Device

ZLT-LJ3, this device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non detachable flexible cords according to IEC60884 1 clause 23.2(table 18),VDE0620 clause23.2(table18),IEC60335 1 table12 clause 25.15.

Ball Pressure Test Device

ZLT-QY1, to determine the dimensional stability of parts consisting of non-ceramic, non metallic insulating materials according to IEC60695 10 2, IEC60335 1 clause 30.1, IEC60598 1 clause 13.2.1 Fig.10, IEC60884 Fig.37, IEC60320 Fig. 23, VDE 0620 Fig.19, IEC60669 1 Fig.25, IEC60670 Fig.5, IEC60967 Fig. 19, etc

Tumbling Barrel Test Machine

ZLT-GT1, is to determine the mechanical strength of lamp or electrical appliances or electrical components in accordance with IEC60598 figure 25 and VDE0620 Bild 27.

Cord Anchorage Testing Machine

ZLT-DY1, for testing cable connections with intermittent tensile load in according to IEC60884/2006 figure 20, VDE0620 Bild 20.

Heat Compression Test Apparatus

ZLT-RS1, to determine the verification of resistance of accessories and surface type mounting at a temperature of (80±2)℃, according to IEC 60884 1 figure 38 and clause 25.4, VDE 0620 figure 37, BS 1363 figure 23.

Verify the Fixation of Pins in the Body of the Plug Test Device

ZLT-CX1, to determine the fixation of pins in the body of the plug, conform to IEC60884 1 figure 30.

Socket Plug Strength Test Device

ZLT-CB1, for verification of the maximum and minimum withdrawal force of the socket and plug, according to IEC60884 1 figure 18 and 19, VDE0620-2005 bild 19.

Indentation Test Device

ZLT-HP1, for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10.

Clamping Device Test Machine

ZLT-DSG2, to test the reliability of clamping devices to hold flexible electrical conductors, according to IEC60884 1 figure 11 and clause 12.2.5, VDE0620

Flexion Test Apparatus

ZLT-DSG3, similar to ZLT DSG2, but according to IEC60947 figure 1 and clause 8.2.4.3, table 5

Lateral Strain Test Device

ZLT-HY1, to determine the lateral strain imposed by equipment likely to be introduced into the socket outlets, which having ratings up to and including 16 A and 250 V, in according to IEC60884-1 figure 13 and clause 13.14, VDE0620,

Compression Test Device

ZLT-YS1, to determine the contact pressure of side earthing contacts of socket outlets, the temperature of the pressure plate, of the base and of the specimens being (23±2)℃ and the force applied being 300 N, in accordance with IEC60884 1 figure 8, VDE0620 figure 8.

Plug Pin Abrasion Testing Machine

ZLT-CTZ1, to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to IEC60884 1 Fig 28, EN 50075 Fig 9, VDE0620 bile 29 and BS1363 Fig 9.

Low Temperature Ram Impact Test Apparatus

ZLT-DCJ1, to determine the mechanical strength of insulated cords, cables, couplers, plug pin insulating sleeves and enclosures in the cold, according to IEC60884 1 figure 27 and 42, IEC60811-1-4 figure 2, VDE0620 figure 28 and 41

Non Solid Pins Test Device

ZLT-CXY1, to determine the mechanical strength of non solid pins, accordance with IEC80884 1 figure14,VDE 0620 Bild 12.

Multiple Portable Socket outlets Mechanical Strength Test Device

ZLT-MS, to determine the mechanical strength test on multiple portable socket outlets, in according to IEC60884 1 figure 29,

Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus

ZLT-AH1, to determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,

Shrouds Pressure Test Apparatus

ZLT-SP1, for testing the deformation and behavior by subjecting to a pressure, according to IEC 60238 figure 9, IEC 60320 1 figure 20, EN 60238 figure 9

Pulling Test Apparatus

ZLT-SP2, to determine the mechanical strength of the connector, accordance with IEC60320 1 figure 19 and clause 23.3,

Test Cylinder

ZLT-GP, to determine the fixed structure reliability of surface type socket outlets, in accordance with IEC60884 1 clause 24.3

Plug and Socket Endurance Testing Machine

ZLT-CS1, to test plugs and socket-outlets, cable couplers and appliance couplers, according to IEC 60884-1 figure 16 and clause 20.

Plug and Socket Endurance Lab Test Equipment

ZLT-CS2, according to IEC 60884-1 figure 16 and clause 20. 2 working station for 2 specimen simultaneously.

Plug and Socket Endurance Tester

ZLT-CS3, according to IEC 60884-1 figure 16 and clause 20. 3 working station for 3 specimen simultaneously.

Switch Life Test Machine

ZLT-SW, to test switches having rated resistive-load currents up to 16 A,in accordance with IEC60669-1 clause 18 and 19

IEC60312 figure 16 Tumbling Barrel Safety Test Equipment

ZLT-GT4, similar to ZLT-GT2, but of larger dimensions for testing of accessories for vacuum cleaners, according to IEC60312 figure 16.

Drop And Fall Tester

ZLT-GT3, similar to ZLT-GT2, but according to BS1363 figure 20.

Tumbling Barrel Lab Test Apparatus

ZLT-GT2, is to determine the mechanical strength of electrical appliances or electrical components in accordance with IEC60068-2-32 Amendment 2

Tumbling Barrel Testing Machine

similar to ZLT-GT2, but according to IEC60730 figure 5.

Cord Anchorage Torque Test Apparatus

ZLT-LJ4, to torque test of plugs and connectors provided with a flexible cable,rated current 13A to 400A, according to IEC62196 clause 25.3 and table 19.

iec accessibility test probe

ul accessibility test probe

accessibility test finger probe

Company profile

All products