The Chinese name of PPS raw material is polyphenylene sulfide, which is abbreviated as PPS. Due to its high temperature resistance and chemical resistance, PPS has become increasingly mature in the automotive field. PPS is added with carbon fiber, which has low injection pressure during molding, good processing fluidity and small warpage, which can meet the requirements of producing complex shapes of electronic appliances and industrial parts. The PPS and carbon fiber introduced by a Japanese company can be used for stereoscopic automatic control of blow molding of pipes with very complicated geometric shapes. The excellent properties of this grade of PPS plastic pellets allow original equipment manufacturers and general industrial customers to produce high temperature gas treatment units and exhaust gas recirculation systems with complex shapes and contoured parts. PPS long carbon fiber manufactured by Ximen LFT composite plastic Co., Ltd. is currently applicable to both extrusion and injection molding. And it has been widely recognized and used at home and abroad.
Long carbon fiber Reinforced Poly(phenylene sulfide) PPS a long fiber reinforced thermoplastic, is Long Fiber reinforced Thermoplastics, compared to conventional fiber reinforced thermoplastics. Typically, fiber lengths in fiber reinforced thermoplastics are less than 1 mm, while in LFT, The length of the fiber is generally more than 2 mm. The current processing technology has been able to maintain the fiber length in the LFT above 5 mm.
