Powered by Cummins K19 Series Engine

No brief introduction

Powered by Cummins 6B Series Engine

Assembly by Cummins brand new engine and brand new single bearing alternator with IP23, class H. Options alternator Brands: Stamford, Leroy Somer, Marathon, Mecc Alte, Hosem, etc. Heavy-duty steel as the base plate with 8 hours operation fuel tank. The extremely low noise level, the canopy is made of 2mm cold-rolled sheet, filled with 3cm thick flame retardant muffler cotton, complete gen-set with heavy-duty industrial type silencer with flexible bellow and elbow. Vibration damper between engine/alternator and base frame 3-pole circuit breaker. Options Controller brands: UK Deepsea, Czech ComAp, CN Smartgen etc. Full range protect function and alarm shutdown feature Comply with ISO8528 national standard and ISO9001 quality standard.

Powered by 6LTAA Series Engine

1. Powered by brand new original Cummins water-cooled diesel engine. 2. Alternator options: Brand new STAMFORD, LEROY SOMER, or Hosem single bearing 3 phase alternator with IP23 and H insulation class. 3. Copper 40ºC radiator with the engine-driven fan mounted on the skid. 4. Delixi or Chint branded case circuit breaker mounted. 5. Heavy-duty fabricated steel-based frame with built-in fuel tank for at least 8 hours of continuous running. 6. Complete set mounted on a based frame with anti-vibration mountings. 7. Industrial 9 dB muffler exhaust system with flexible connects and bellows. 8. Based frame with fuel, oil, and coolant drain cocks for easy maintenance. 9. 12/24V DC electric start system with free maintenance battery & smarten brand battery charger. 10. Set mounted automatic control panel, with SMARTGEN or Deepsea and ComAp controller module with AMF function for automatic start & stop. 11. Document supply: test report of the generator, set of drawings, and manuals.

Powered by Cummins K38 Series Engine

1. Powered by Cummins G-drive engine, 1) Water cooling, 4 stroke, 12 cylinders 2) Radiation with water tank & fan & safeguard 3. Alternator: Original Stamford/Marathon (Made in China) or Hosem Brushless Alternator 1) Single bearing, 4pole, and self-excited brushless. 2) Insulation --H class, Protection -- IP22 (IP23 in marine) 3) AVR(auto voltage regulation) Control System: Key starting, Auto control panel, Remote control panel, ATS(Auto transfer switch)

Powered by Cummins 4B Series Engine

1. Powered by brand new original Cummins water-cooled diesel engine. 2. Alternator options: Brand new STAMFORD, LEROY SOMER, or Hosem single bearing 3 phase alternator with IP23 and H insulation class. 3. Copper 40ºC radiator with the engine-driven fan mounted on the skid. 4. Delixi or Chint branded case circuit breaker mounted. 5. Heavy-duty fabricated steel-based frame with built-in fuel tank for at least 8 hours of continuous running. 6. Complete set mounted on a based frame with anti-vibration mountings. 7. Industrial 9 dB muffler exhaust system with flexible connects and bellows. 8. Based frame with fuel, oil, and coolant drain cocks for easy maintenance. 9. 12/24V DC electric start system with free maintenance battery & smarten brand battery charger. 10. Set mounted automatic control panel, with SMARTGEN or Deepsea and ComAp controller module with AMF function for automatic start & stop. 11. Document supply: test report of the generator, set of drawings, and manuals.

Powered by Cummins 6CT Series Engine

No brief introduction

Weichai Marine Generator 50kW

Standard Features 1. With brand new Weichai engine WP4.1CD66E200, ECM governor 2. 24 volt DC start/charging 3. 1200hours overhaul period 4. Automatic engine shut down for low oil & high coolant temperature. 5. Heavy-duty steel mounting frame. 6. Single bearing marine standard alternator Optional Equipment 1. Remote start / stop panel / 20ft extension harness 2. Electric fuel pump 3. Wet exhaust manifold 4. Wet turbocharger 5. Circuit breaker

Weichai Marine Generator 20kW

Standard Features 1. With brand new Weichai engine WP3.2CD28E310, ECM governor 2. 12 volt DC start/charging 3. Low fuel consumption, minimum fuel consumption 196g/kW.h 4. Meet with the emission requirement of IMO II 5. 1200hours overhaul period 6. Automatic engine shut down for low oil & high coolant temperature. 7. Heavy-duty steel mounting frame. 8. Single bearing marine standard alternator Optional Equipment 1. Remote start / stop panel / 20ft extension harness 2. Electric fuel pump 3. Wet exhaust manifold 4. Wet turbocharger 5. Circuit breaker