China precision instrument Manufacturers, Top Mechanic Factory

SST-DN4-104-2 | WOODHEAD | Interface Cards

SST-DN4-104-2 DN4-104 Series SST DeviceNet PCU Card

LiCoO2 for lithium ion battery raw materials

Lithium cobalt oxide powder/LiCoO2 powder for lithiumion battery cathode materials

203mm Loading Pad GT-LB01-8

This load pad is designed specifically for BIFMA X5.1, which is a rigid circular object 203±13 mm in diameter,with a 12 mm front edge radius.

SST-PFB-PLC5 | WOODHEAD | CAR MODULE

SST-PFB-PLC5 These terminals provide power to the isolated section of the network interface

Impact Hammer GT-LB01-7

Impact hammer, with a cylindrical pendulum head having a mass of 6,5 kg, supported from a pivot by a steel tube of 38 mm in diameter and with a wall thickness of 2 mm.

LiNiCoMnO2 (Ni:Co:Mn=8:1:1) NCM Powder for Li-ion Battery

Lithium Nickel Manganese Cobalt Oxide nmc 811 cathode material Powder.

LMNO(LNMO) LiNi0.5Mn1.5O4 Cathode Powder

LMNO(LNMO) LiNi0.5Mn1.5O4 Cathode Powderfor Lithium Battery Cathode Raw Materials

SST-DN4-102-2 | WOODHEAD | POWER MODULE

SST-DN4-102-2 Each channel’s I/O base address is set via a 6-position switch

Seat Impactor Device GT-LB01-6

The seat impactor is comprised of the following elements, circular body, springs and striking surface. Is the necessary accessories for seat impact test.

LiNiMnCoO2 NMC 811 Powder For Lithium Battery Cathode Materials

LiNiMnCoO2 NMC 811 Powder For Lithium Battery Cathode Materials.

SST-PB3-CLX | WOODHEAD | communication MODULE

SST-PB3-CLX Profibus scanner firmwares

Chair Armrest and Seat Front Edge Testing Machine GT-LB03S

Chair Armrest and Seat Front Edge Testing Machine GT-LB03S tests the strength and durability of the handrails, seats, or other parts by simulating the loading of the seats during routine use.

Conductive Graphite powder for lithium battery

Conductive Graphite is used as conductive material when preparing Li-ion battery Cathode and Anode.

SST-DN3-PCU-2-E SST-DN3-PCI-2 | WOODHEAD

SST-DN3-PCU-2-E SST-DN3-PCI-2 Channel 1ch DeviceNet Interface

Back loading pad, which is a rigid rectangular object 200 mm high and 250 mm wide, the loading surface of which is curved across the width of the pad with a convex cylindrical curvature of 450 mm radius and with a 12 mm radius on all front edges.

High rate high capacity graphite powder for battery

Applicable to all kinds of lithium ion battery, especially the power type, capacity type power battery (electric tools, model aircraft, electric bicycle, electric vehicle...)

WOODWARD | Electronic Module | 5462-916

Fast shipping & great discount

Smaller Seat Loading pad GT-LB01-3

Smaller seat loading pad, which is a rigid circular object 200 mm in diameter, the loading surface of which has a convex spherical curvature of 300 mm radius with a 12 mm front edge radius.

Graphite powder for lithium battery anode material

Suitable for steel battery, aluminum shell battery, polymer battery, power battery etc.

WOODWARD | Actuator Control | 5464-544

Fast shipping & great discount

Seat Loading Pad GT-LB01-2B

Seat loading pad, which is a naturalistically shaped rigid indenter with a hard, smooth surface .

MCMB mesocarbon microbeads for lithium ion battery

Applicable to all kinds of lithium ion battery, especially the power battery and cylinder battery.

WOODWARD | Output Module | 5461-644

4-20mA Current Output Module

Seat Loading Pad GT-LB01-2A

Seat loading pad, which is a naturalistically shaped rigid indenter with a hard, smooth surface .

Natural graphite powder for li ion battery anode

TGP series anode material graphite powder is specifically for electric vehicles battery, electric bicycles battery, electric tool battery.

WOODWARD | Isolated Input Module | 5463-581

4-20mA Sch Isolated Input Module

Loading Point Template GT-LB01-1B

Loading point template, a template, which consists of two shaped members fastened together by a pivot at one end.

Natural graphite powder for high-end lithium ion battery

Suitable for high-end square, cylindrical, polymer, power lithium ion battery.

SINEAX V604 604-112 | GOSSEN CAMILLE | PLC CPU MODULE

SINEAX V604 604-112 Programmable Universal Transmitter

Loading Point Template GT-LB01-1A

Loading point template, a template, which consists of two shaped members fastened together by a pivot at one end.

Natural graphite powder for lithium ion battery

Suitable for high-end square, cylindrical, polymer, power lithium ion battery.

527-003-250 | GRACO LUBRIQUIP | Valve Accessories

527-003-250 Lubriquip Cylinder Indicator Proximity Switch

Local Loading Pad GT-LB01-5

Local loading pad, which is a rigid cylindrical object 100 mm in diameter, with a flat face and a 12 mm edge radius.

HI 1756-WS | HARDY | Hardy Process Solutions

HI 1756-WS WEIGH SCALE MODULE

Lithium Titanate Li4Ti5O12

No brief introduction

Chair Sideways Testing Machine GT-LB12

Chair Sideways Testing Machine is used to simulate the loading condition of the chair in daily use, and test the lateral static load strength of the handrail.