China precision instrument Manufacturers, Top Mechanic Factory

Battery internal short-circuit integrated testing machine

No brief introduction

UV Accelerated Weathering Tester AG19

UV Accelerated Weathering Tester can simulates the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature.

WOODWARD 9907-164 DIGITAL GOVERNOR CONTROL

WOODWARD 9907-018 DIGITAL GOVERNOR CONTROL 120/220VAC 24VDC 6X 4/20M

Lap Meter GT-B27

Lap Meter is used for testing the segment evenness of cotton lap at specified length, at the same time testing the weight and percentage of elongation of cotton lap.

Small Torque Fixture GT-M42

Torque Test for Toys Torque Clamp Middle is the assistant tool for toys torque test.

Lithium Battery Thermal Shock Chambers

No brief introduction

Spray Rating Tester AG20

Spray Rating Tester is used to determine the water resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water.

WOODWARD 9907-175 PLC DCS Modules

WOODWARD 9907-175 NEW IN STOCK

Digital Tension Meter (Yarn Tension Measurement) GT-A18

Digital Tension Meter is used for testing dynamic tensile force of flexibility line material.

Middle Torque Fixture GT-M41

Middle Torque Fixtureis the assistant tool for toys torque test.

Battery vercharge-proof box testing machine

No brief introduction

Downproof Tester AG21

Textile Downproof Tester is used to test eiderdown, feather, fibre, and other lining material penetration through the fabric of cold protective clothing and bedclothes.

WOODWARD 9907-838 LOAD SHARING MODULE

WOODWARD 9907-838 LOAD SHARING MODULE 100-240VAC 50-400HZ

Yarn Coefficient of Friction Tester GT-A32

Yarn Friction Tester is suitable for measuring the static friction coefficient and kinetic friction coefficient.

EN Flexure Tester GT-M44B

EN Flexure Tester is used to do the bending tests which meets standards: EN71-1 section 8.13, ISO 8124-1 section 5.24.8, GB6675-2 section 5.24.8.

Simulate high altitude low-pressure chamber for li-battery testing machine

No brief introduction

AATCC 35/ISO 22958 Rain Tester AG22

Rain Tester is used to determine the penetration resistance of fabrics or composites at different intensities of water impact.

WOODWARD APPLICOM-PCI1000 PLC DCS Modules

WOODWARD APPLICOM-PCI1000 NEW IN STOCK

Semi-automatic Ventilate Quick Constant Tem. Oven GT-A37

This Constant Temperature Oven is designed for testing moisture regain on cotton, fur, fiber, silk, chemical fiber and other textile & finished products quickly.

ASTM Flexure Tester GT-M44A

Flexure Tester is used to do bending test, meets standards: ASTM F963, 16 CFR 1500, GB6675-2.

Horizontal Computer Control Power Battery Crush Testing Machine

No brief introduction

Fabric Digital Thickness Tester AG23

Fabric Digital Thickness Tester is special thickness meter for textile meet standard ASTM D1777.

WOODWARD APP-PS7-PCI PLC DCS Modules

WOODWARD APP-PS7-PCI NEW IN STOCK

Full-automatic Ventilated Fast Constant Tem. Oven GT-A38

Air Ventilation Oven is used for rapidly testing the moisture content and moisture regain of cotton, wool, silk, chemical fiber and other textile products.

Long - Mouth Clamp GT-M43

Long Mouth Clamp is the assistant tool used for toys tension test and it can do the tests according to standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124, GB6675-2.

Horizontal power battery needling testing machine

No brief introduction

ELectronic Thickness Tester AG24

ELectronic Thickness Tester is used for measure the thickness of fabric, woven fabrics, knitted fabrics and other uniform thin material.

WOODWARD EASYGEN-1000 8440-1809

Yarn Fault Classifying System of Textile Instrument GT-A39

Yarn Fault Classifying System detects and analyzes sporadic yarn faults.

Two Pronged Clamp GT-M36

Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Battery extrusion three comprehensive testing machine

No brief introduction

Pneumatic Sample Cutting Press AG25

Pneumatic Sample Cutting Press is a new type of table-top sheet press, with 125mm air cylinder, 50mm cutting thickness, 125 × 125mm cutting table. It can bring 8KN press under 100psi air pressure.

WOODWARD ESAYGEN-1000 8440-1809/EASYGEN-1500-55B PLC DCS Modules

WOODWARD ESAYGEN-1000 8440-1809/EASYGEN-1500-55B

Microcomputer Seed Cotton Moisture Regain Tester GT-B32A

This tester adopt computer control system, used to determine the curl contraction and boiling water shrinkage of deformation silk.

Three Pronged Clamp GT-M37

Three Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

100CM² Sample Cutter (GSM Cutter) AG26

100CM² GSM Sample Cutter (GSM Cutter) is used to cut fabric, felt, paper, to get circular sample, suitable to cut 5mm depth. Will saves time and cuts sample precisely.