Product Item
Pressure swing adsorption nitrogen integration skid-mounted equipment nitrogen compress
Product Description
The gas injected by nitrogen foam flooding device can drive and sweep to the parts that cannot be affected by water flooding and are difficult to be mined, thus improving the sweep volume of oil layer.
Because of the gas seepage resistance is far less than the filtrational resistance of injection liquids, gases can enter the water flooding affected less than the low permeable formation (part), especially those different deposition conditions by successive parts, this has not been used, difficulty in mining area of remaining oil displacement sweep out, so as to improve the swept volume of reservoir.
Technical parameters of nitrogen compressors
|
Model
|
Medium
|
volume flow
(m3 /min)
|
Inlet pressure
(MPa)
|
|
|
|
VW-3.4/0.5-10
|
Nitrogen hydrogen
|
3.4
|
0.05
|
1
|
30
|
|
VW-5.5/0.5-10
|
Nitrogen hydrogen
|
5.5
|
0.05
|
1
|
55
|
PS:The above models are only partial specifications.Our company can design and manufacture nitrogen compressors suitable for customers' special working conditions and technical requirements.Please contact our company.
Our services
1. After customers purchase our compressors, the company will establish a user profile card to provide all-day service.
2, Compressor quality problems, free maintenance, lifelong maintenance.
3. After signing the purchase contract with Longhua company, users can send technicians to Longhua company for free training.
4. Provide engineering design, equipment supply, installation and debugging services as required by users.
5. During the warranty period, any product quality problems arising from correct operation in accordance with the operating instructions shall be covered by the warranty, and no maintenance fee shall be charged (except for wearing parts).
6. Longhua company will provide technical support within 24 hours for users who encounter problems in the process of use.
Our Customers
Contact Us
